/* * Copyright (C) 2014 Rob Clark * * Permission is hereby granted, free of charge, to any person obtaining a * copy of this software and associated documentation files (the "Software"), * to deal in the Software without restriction, including without limitation * the rights to use, copy, modify, merge, publish, distribute, sublicense, * and/or sell copies of the Software, and to permit persons to whom the * Software is furnished to do so, subject to the following conditions: * * The above copyright notice and this permission notice (including the next * paragraph) shall be included in all copies or substantial portions of the * Software. * * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL * THE AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER * LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, * OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE * SOFTWARE. * * Authors: * Rob Clark */ #include "util/u_math.h" #include "util/register_allocate.h" #include "util/ralloc.h" #include "util/bitset.h" #include "ir3.h" #include "ir3_compiler.h" /* * Register Assignment: * * Uses the register_allocate util, which implements graph coloring * algo with interference classes. To handle the cases where we need * consecutive registers (for example, texture sample instructions), * we model these as larger (double/quad/etc) registers which conflict * with the corresponding registers in other classes. * * Additionally we create additional classes for half-regs, which * do not conflict with the full-reg classes. We do need at least * sizes 1-4 (to deal w/ texture sample instructions output to half- * reg). At the moment we don't create the higher order half-reg * classes as half-reg frequently does not have enough precision * for texture coords at higher resolutions. * * There are some additional cases that we need to handle specially, * as the graph coloring algo doesn't understand "partial writes". * For example, a sequence like: * * add r0.z, ... * sam (f32)(xy)r0.x, ... * ... * sam (f32)(xyzw)r0.w, r0.x, ... ; 3d texture, so r0.xyz are coord * * In this scenario, we treat r0.xyz as class size 3, which is written * (from a use/def perspective) at the 'add' instruction and ignore the * subsequent partial writes to r0.xy. So the 'add r0.z, ...' is the * defining instruction, as it is the first to partially write r0.xyz. * * Note i965 has a similar scenario, which they solve with a virtual * LOAD_PAYLOAD instruction which gets turned into multiple MOV's after * register assignment. But for us that is horrible from a scheduling * standpoint. Instead what we do is use idea of 'definer' instruction. * Ie. the first instruction (lowest ip) to write to the variable is the * one we consider from use/def perspective when building interference * graph. (Other instructions which write other variable components * just define the variable some more.) * * Arrays of arbitrary size are handled via pre-coloring a consecutive * sequence of registers. Additional scalar (single component) reg * names are allocated starting at ctx->class_base[total_class_count] * (see arr->base), which are pre-colored. In the use/def graph direct * access is treated as a single element use/def, and indirect access * is treated as use or def of all array elements. (Only the first * def is tracked, in case of multiple indirect writes, etc.) * * TODO arrays that fit in one of the pre-defined class sizes should * not need to be pre-colored, but instead could be given a normal * vreg name. (Ignoring this for now since it is a good way to work * out the kinks with arbitrary sized arrays.) * * TODO might be easier for debugging to split this into two passes, * the first assigning vreg names in a way that we could ir3_print() * the result. */ static const unsigned class_sizes[] = { 1, 2, 3, 4, 4 + 4, /* txd + 1d/2d */ 4 + 6, /* txd + 3d */ }; #define class_count ARRAY_SIZE(class_sizes) static const unsigned half_class_sizes[] = { 1, 2, 3, 4, }; #define half_class_count ARRAY_SIZE(half_class_sizes) /* seems to just be used for compute shaders? Seems like vec1 and vec3 * are sufficient (for now?) */ static const unsigned high_class_sizes[] = { 1, 3, }; #define high_class_count ARRAY_SIZE(high_class_sizes) #define total_class_count (class_count + half_class_count + high_class_count) /* Below a0.x are normal regs. RA doesn't need to assign a0.x/p0.x. */ #define NUM_REGS (4 * 48) /* r0 to r47 */ #define NUM_HIGH_REGS (4 * 8) /* r48 to r55 */ #define FIRST_HIGH_REG (4 * 48) /* Number of virtual regs in a given class: */ #define CLASS_REGS(i) (NUM_REGS - (class_sizes[i] - 1)) #define HALF_CLASS_REGS(i) (NUM_REGS - (half_class_sizes[i] - 1)) #define HIGH_CLASS_REGS(i) (NUM_HIGH_REGS - (high_class_sizes[i] - 1)) #define HALF_OFFSET (class_count) #define HIGH_OFFSET (class_count + half_class_count) /* register-set, created one time, used for all shaders: */ struct ir3_ra_reg_set { struct ra_regs *regs; unsigned int classes[class_count]; unsigned int half_classes[half_class_count]; unsigned int high_classes[high_class_count]; /* maps flat virtual register space to base gpr: */ uint16_t *ra_reg_to_gpr; /* maps cls,gpr to flat virtual register space: */ uint16_t **gpr_to_ra_reg; }; static void build_q_values(unsigned int **q_values, unsigned off, const unsigned *sizes, unsigned count) { for (unsigned i = 0; i < count; i++) { q_values[i + off] = rzalloc_array(q_values, unsigned, total_class_count); /* From register_allocate.c: * * q(B,C) (indexed by C, B is this register class) in * Runeson/Nyström paper. This is "how many registers of B could * the worst choice register from C conflict with". * * If we just let the register allocation algorithm compute these * values, is extremely expensive. However, since all of our * registers are laid out, we can very easily compute them * ourselves. View the register from C as fixed starting at GRF n * somewhere in the middle, and the register from B as sliding back * and forth. Then the first register to conflict from B is the * one starting at n - class_size[B] + 1 and the last register to * conflict will start at n + class_size[B] - 1. Therefore, the * number of conflicts from B is class_size[B] + class_size[C] - 1. * * +-+-+-+-+-+-+ +-+-+-+-+-+-+ * B | | | | | |n| --> | | | | | | | * +-+-+-+-+-+-+ +-+-+-+-+-+-+ * +-+-+-+-+-+ * C |n| | | | | * +-+-+-+-+-+ * * (Idea copied from brw_fs_reg_allocate.cpp) */ for (unsigned j = 0; j < count; j++) q_values[i + off][j + off] = sizes[i] + sizes[j] - 1; } } /* One-time setup of RA register-set, which describes all the possible * "virtual" registers and their interferences. Ie. double register * occupies (and conflicts with) two single registers, and so forth. * Since registers do not need to be aligned to their class size, they * can conflict with other registers in the same class too. Ie: * * Single (base) | Double * --------------+--------------- * R0 | D0 * R1 | D0 D1 * R2 | D1 D2 * R3 | D2 * .. and so on.. * * (NOTE the disassembler uses notation like r0.x/y/z/w but those are * really just four scalar registers. Don't let that confuse you.) */ struct ir3_ra_reg_set * ir3_ra_alloc_reg_set(struct ir3_compiler *compiler) { struct ir3_ra_reg_set *set = rzalloc(compiler, struct ir3_ra_reg_set); unsigned ra_reg_count, reg, first_half_reg, first_high_reg, base; unsigned int **q_values; /* calculate # of regs across all classes: */ ra_reg_count = 0; for (unsigned i = 0; i < class_count; i++) ra_reg_count += CLASS_REGS(i); for (unsigned i = 0; i < half_class_count; i++) ra_reg_count += HALF_CLASS_REGS(i); for (unsigned i = 0; i < high_class_count; i++) ra_reg_count += HIGH_CLASS_REGS(i); /* allocate and populate q_values: */ q_values = ralloc_array(set, unsigned *, total_class_count); build_q_values(q_values, 0, class_sizes, class_count); build_q_values(q_values, HALF_OFFSET, half_class_sizes, half_class_count); build_q_values(q_values, HIGH_OFFSET, high_class_sizes, high_class_count); /* allocate the reg-set.. */ set->regs = ra_alloc_reg_set(set, ra_reg_count, true); set->ra_reg_to_gpr = ralloc_array(set, uint16_t, ra_reg_count); set->gpr_to_ra_reg = ralloc_array(set, uint16_t *, total_class_count); /* .. and classes */ reg = 0; for (unsigned i = 0; i < class_count; i++) { set->classes[i] = ra_alloc_reg_class(set->regs); set->gpr_to_ra_reg[i] = ralloc_array(set, uint16_t, CLASS_REGS(i)); for (unsigned j = 0; j < CLASS_REGS(i); j++) { ra_class_add_reg(set->regs, set->classes[i], reg); set->ra_reg_to_gpr[reg] = j; set->gpr_to_ra_reg[i][j] = reg; for (unsigned br = j; br < j + class_sizes[i]; br++) ra_add_transitive_reg_conflict(set->regs, br, reg); reg++; } } first_half_reg = reg; base = HALF_OFFSET; for (unsigned i = 0; i < half_class_count; i++) { set->half_classes[i] = ra_alloc_reg_class(set->regs); set->gpr_to_ra_reg[base + i] = ralloc_array(set, uint16_t, HALF_CLASS_REGS(i)); for (unsigned j = 0; j < HALF_CLASS_REGS(i); j++) { ra_class_add_reg(set->regs, set->half_classes[i], reg); set->ra_reg_to_gpr[reg] = j; set->gpr_to_ra_reg[base + i][j] = reg; for (unsigned br = j; br < j + half_class_sizes[i]; br++) ra_add_transitive_reg_conflict(set->regs, br + first_half_reg, reg); reg++; } } first_high_reg = reg; base = HIGH_OFFSET; for (unsigned i = 0; i < high_class_count; i++) { set->high_classes[i] = ra_alloc_reg_class(set->regs); set->gpr_to_ra_reg[base + i] = ralloc_array(set, uint16_t, HIGH_CLASS_REGS(i)); for (unsigned j = 0; j < HIGH_CLASS_REGS(i); j++) { ra_class_add_reg(set->regs, set->high_classes[i], reg); set->ra_reg_to_gpr[reg] = j; set->gpr_to_ra_reg[base + i][j] = reg; for (unsigned br = j; br < j + high_class_sizes[i]; br++) ra_add_transitive_reg_conflict(set->regs, br + first_high_reg, reg); reg++; } } /* starting a6xx, half precision regs conflict w/ full precision regs: */ if (compiler->gpu_id >= 600) { /* because of transitivity, we can get away with just setting up * conflicts between the first class of full and half regs: */ for (unsigned i = 0; i < half_class_count; i++) { /* NOTE there are fewer half class sizes, but they match the * first N full class sizes.. but assert in case that ever * accidentially changes: */ debug_assert(class_sizes[i] == half_class_sizes[i]); for (unsigned j = 0; j < CLASS_REGS(i) / 2; j++) { unsigned freg = set->gpr_to_ra_reg[i][j]; unsigned hreg0 = set->gpr_to_ra_reg[i + HALF_OFFSET][(j * 2) + 0]; unsigned hreg1 = set->gpr_to_ra_reg[i + HALF_OFFSET][(j * 2) + 1]; ra_add_transitive_reg_conflict(set->regs, freg, hreg0); ra_add_transitive_reg_conflict(set->regs, freg, hreg1); } } // TODO also need to update q_values, but for now: ra_set_finalize(set->regs, NULL); } else { ra_set_finalize(set->regs, q_values); } ralloc_free(q_values); return set; } /* additional block-data (per-block) */ struct ir3_ra_block_data { BITSET_WORD *def; /* variables defined before used in block */ BITSET_WORD *use; /* variables used before defined in block */ BITSET_WORD *livein; /* which defs reach entry point of block */ BITSET_WORD *liveout; /* which defs reach exit point of block */ }; /* additional instruction-data (per-instruction) */ struct ir3_ra_instr_data { /* cached instruction 'definer' info: */ struct ir3_instruction *defn; int off, sz, cls; }; /* register-assign context, per-shader */ struct ir3_ra_ctx { struct ir3 *ir; gl_shader_stage type; bool frag_face; struct ir3_ra_reg_set *set; struct ra_graph *g; unsigned alloc_count; /* one per class, plus one slot for arrays: */ unsigned class_alloc_count[total_class_count + 1]; unsigned class_base[total_class_count + 1]; unsigned instr_cnt; unsigned *def, *use; /* def/use table */ struct ir3_ra_instr_data *instrd; }; /* does it conflict? */ static inline bool intersects(unsigned a_start, unsigned a_end, unsigned b_start, unsigned b_end) { return !((a_start >= b_end) || (b_start >= a_end)); } static bool is_half(struct ir3_instruction *instr) { return !!(instr->regs[0]->flags & IR3_REG_HALF); } static bool is_high(struct ir3_instruction *instr) { return !!(instr->regs[0]->flags & IR3_REG_HIGH); } static int size_to_class(unsigned sz, bool half, bool high) { if (high) { for (unsigned i = 0; i < high_class_count; i++) if (high_class_sizes[i] >= sz) return i + HIGH_OFFSET; } else if (half) { for (unsigned i = 0; i < half_class_count; i++) if (half_class_sizes[i] >= sz) return i + HALF_OFFSET; } else { for (unsigned i = 0; i < class_count; i++) if (class_sizes[i] >= sz) return i; } debug_assert(0); return -1; } static bool writes_gpr(struct ir3_instruction *instr) { if (is_store(instr)) return false; /* is dest a normal temp register: */ struct ir3_register *reg = instr->regs[0]; if (reg->flags & (IR3_REG_CONST | IR3_REG_IMMED)) return false; if ((reg->num == regid(REG_A0, 0)) || (reg->num == regid(REG_P0, 0))) return false; return true; } static bool instr_before(struct ir3_instruction *a, struct ir3_instruction *b) { if (a->flags & IR3_INSTR_UNUSED) return false; return (a->ip < b->ip); } static struct ir3_instruction * get_definer(struct ir3_ra_ctx *ctx, struct ir3_instruction *instr, int *sz, int *off) { struct ir3_ra_instr_data *id = &ctx->instrd[instr->ip]; struct ir3_instruction *d = NULL; if (id->defn) { *sz = id->sz; *off = id->off; return id->defn; } if (instr->opc == OPC_META_FI) { /* What about the case where collect is subset of array, we * need to find the distance between where actual array starts * and fanin.. that probably doesn't happen currently. */ struct ir3_register *src; int dsz, doff; /* note: don't use foreach_ssa_src as this gets called once * while assigning regs (which clears SSA flag) */ foreach_src_n(src, n, instr) { struct ir3_instruction *dd; if (!src->instr) continue; dd = get_definer(ctx, src->instr, &dsz, &doff); if ((!d) || instr_before(dd, d)) { d = dd; *sz = dsz; *off = doff - n; } } } else if (instr->cp.right || instr->cp.left) { /* covers also the meta:fo case, which ends up w/ single * scalar instructions for each component: */ struct ir3_instruction *f = ir3_neighbor_first(instr); /* by definition, the entire sequence forms one linked list * of single scalar register nodes (even if some of them may * be fanouts from a texture sample (for example) instr. We * just need to walk the list finding the first element of * the group defined (lowest ip) */ int cnt = 0; /* need to skip over unused in the group: */ while (f && (f->flags & IR3_INSTR_UNUSED)) { f = f->cp.right; cnt++; } while (f) { if ((!d) || instr_before(f, d)) d = f; if (f == instr) *off = cnt; f = f->cp.right; cnt++; } *sz = cnt; } else { /* second case is looking directly at the instruction which * produces multiple values (eg, texture sample), rather * than the fanout nodes that point back to that instruction. * This isn't quite right, because it may be part of a larger * group, such as: * * sam (f32)(xyzw)r0.x, ... * add r1.x, ... * add r1.y, ... * sam (f32)(xyzw)r2.x, r0.w <-- (r0.w, r1.x, r1.y) * * need to come up with a better way to handle that case. */ if (instr->address) { *sz = instr->regs[0]->size; } else { *sz = util_last_bit(instr->regs[0]->wrmask); } *off = 0; d = instr; } if (d->opc == OPC_META_FO) { struct ir3_instruction *dd; int dsz, doff; dd = get_definer(ctx, d->regs[1]->instr, &dsz, &doff); /* by definition, should come before: */ debug_assert(instr_before(dd, d)); *sz = MAX2(*sz, dsz); if (instr->opc == OPC_META_FO) *off = MAX2(*off, instr->fo.off); d = dd; } debug_assert(d->opc != OPC_META_FO); id->defn = d; id->sz = *sz; id->off = *off; return d; } static void ra_block_find_definers(struct ir3_ra_ctx *ctx, struct ir3_block *block) { list_for_each_entry (struct ir3_instruction, instr, &block->instr_list, node) { struct ir3_ra_instr_data *id = &ctx->instrd[instr->ip]; if (instr->regs_count == 0) continue; /* couple special cases: */ if (writes_addr(instr) || writes_pred(instr)) { id->cls = -1; } else if (instr->regs[0]->flags & IR3_REG_ARRAY) { id->cls = total_class_count; } else { /* and the normal case: */ id->defn = get_definer(ctx, instr, &id->sz, &id->off); id->cls = size_to_class(id->sz, is_half(id->defn), is_high(id->defn)); /* this is a bit of duct-tape.. if we have a scenario like: * * sam (f32)(x) out.x, ... * sam (f32)(x) out.y, ... * * Then the fanout/split meta instructions for the two different * tex instructions end up grouped as left/right neighbors. The * upshot is that in when you get_definer() on one of the meta:fo's * you get definer as the first sam with sz=2, but when you call * get_definer() on the either of the sam's you get itself as the * definer with sz=1. * * (We actually avoid this scenario exactly, the neighbor links * prevent one of the output mov's from being eliminated, so this * hack should be enough. But probably we need to rethink how we * find the "defining" instruction.) * * TODO how do we figure out offset properly... */ if (id->defn != instr) { struct ir3_ra_instr_data *did = &ctx->instrd[id->defn->ip]; if (did->sz < id->sz) { did->sz = id->sz; did->cls = id->cls; } } } } } /* give each instruction a name (and ip), and count up the # of names * of each class */ static void ra_block_name_instructions(struct ir3_ra_ctx *ctx, struct ir3_block *block) { list_for_each_entry (struct ir3_instruction, instr, &block->instr_list, node) { struct ir3_ra_instr_data *id = &ctx->instrd[instr->ip]; #ifdef DEBUG instr->name = ~0; #endif ctx->instr_cnt++; if (instr->regs_count == 0) continue; if (!writes_gpr(instr)) continue; if (id->defn != instr) continue; /* arrays which don't fit in one of the pre-defined class * sizes are pre-colored: */ if ((id->cls >= 0) && (id->cls < total_class_count)) { instr->name = ctx->class_alloc_count[id->cls]++; ctx->alloc_count++; } } } static void ra_init(struct ir3_ra_ctx *ctx) { unsigned n, base; ir3_clear_mark(ctx->ir); n = ir3_count_instructions(ctx->ir); ctx->instrd = rzalloc_array(NULL, struct ir3_ra_instr_data, n); list_for_each_entry (struct ir3_block, block, &ctx->ir->block_list, node) { ra_block_find_definers(ctx, block); } list_for_each_entry (struct ir3_block, block, &ctx->ir->block_list, node) { ra_block_name_instructions(ctx, block); } /* figure out the base register name for each class. The * actual ra name is class_base[cls] + instr->name; */ ctx->class_base[0] = 0; for (unsigned i = 1; i <= total_class_count; i++) { ctx->class_base[i] = ctx->class_base[i-1] + ctx->class_alloc_count[i-1]; } /* and vreg names for array elements: */ base = ctx->class_base[total_class_count]; list_for_each_entry (struct ir3_array, arr, &ctx->ir->array_list, node) { arr->base = base; ctx->class_alloc_count[total_class_count] += arr->length; base += arr->length; } ctx->alloc_count += ctx->class_alloc_count[total_class_count]; ctx->g = ra_alloc_interference_graph(ctx->set->regs, ctx->alloc_count); ralloc_steal(ctx->g, ctx->instrd); ctx->def = rzalloc_array(ctx->g, unsigned, ctx->alloc_count); ctx->use = rzalloc_array(ctx->g, unsigned, ctx->alloc_count); } static unsigned __ra_name(struct ir3_ra_ctx *ctx, int cls, struct ir3_instruction *defn) { unsigned name; debug_assert(cls >= 0); debug_assert(cls < total_class_count); /* we shouldn't get arrays here.. */ name = ctx->class_base[cls] + defn->name; debug_assert(name < ctx->alloc_count); return name; } static int ra_name(struct ir3_ra_ctx *ctx, struct ir3_ra_instr_data *id) { /* TODO handle name mapping for arrays */ return __ra_name(ctx, id->cls, id->defn); } static void ra_destroy(struct ir3_ra_ctx *ctx) { ralloc_free(ctx->g); } static void ra_block_compute_live_ranges(struct ir3_ra_ctx *ctx, struct ir3_block *block) { struct ir3_ra_block_data *bd; unsigned bitset_words = BITSET_WORDS(ctx->alloc_count); #define def(name, instr) \ do { \ /* defined on first write: */ \ if (!ctx->def[name]) \ ctx->def[name] = instr->ip; \ ctx->use[name] = instr->ip; \ BITSET_SET(bd->def, name); \ } while(0); #define use(name, instr) \ do { \ ctx->use[name] = MAX2(ctx->use[name], instr->ip); \ if (!BITSET_TEST(bd->def, name)) \ BITSET_SET(bd->use, name); \ } while(0); bd = rzalloc(ctx->g, struct ir3_ra_block_data); bd->def = rzalloc_array(bd, BITSET_WORD, bitset_words); bd->use = rzalloc_array(bd, BITSET_WORD, bitset_words); bd->livein = rzalloc_array(bd, BITSET_WORD, bitset_words); bd->liveout = rzalloc_array(bd, BITSET_WORD, bitset_words); block->data = bd; list_for_each_entry (struct ir3_instruction, instr, &block->instr_list, node) { struct ir3_instruction *src; struct ir3_register *reg; if (instr->regs_count == 0) continue; /* There are a couple special cases to deal with here: * * fanout: used to split values from a higher class to a lower * class, for example split the results of a texture fetch * into individual scalar values; We skip over these from * a 'def' perspective, and for a 'use' we walk the chain * up to the defining instruction. * * fanin: used to collect values from lower class and assemble * them together into a higher class, for example arguments * to texture sample instructions; We consider these to be * defined at the earliest fanin source. * * Most of this is handled in the get_definer() helper. * * In either case, we trace the instruction back to the original * definer and consider that as the def/use ip. */ if (writes_gpr(instr)) { struct ir3_ra_instr_data *id = &ctx->instrd[instr->ip]; struct ir3_register *dst = instr->regs[0]; if (dst->flags & IR3_REG_ARRAY) { struct ir3_array *arr = ir3_lookup_array(ctx->ir, dst->array.id); unsigned i; arr->start_ip = MIN2(arr->start_ip, instr->ip); arr->end_ip = MAX2(arr->end_ip, instr->ip); /* set the node class now.. in case we don't encounter * this array dst again. From register_alloc algo's * perspective, these are all single/scalar regs: */ for (i = 0; i < arr->length; i++) { unsigned name = arr->base + i; ra_set_node_class(ctx->g, name, ctx->set->classes[0]); } /* indirect write is treated like a write to all array * elements, since we don't know which one is actually * written: */ if (dst->flags & IR3_REG_RELATIV) { for (i = 0; i < arr->length; i++) { unsigned name = arr->base + i; def(name, instr); } } else { unsigned name = arr->base + dst->array.offset; def(name, instr); } } else if (id->defn == instr) { unsigned name = ra_name(ctx, id); /* since we are in SSA at this point: */ debug_assert(!BITSET_TEST(bd->use, name)); def(name, id->defn); if (is_high(id->defn)) { ra_set_node_class(ctx->g, name, ctx->set->high_classes[id->cls - HIGH_OFFSET]); } else if (is_half(id->defn)) { ra_set_node_class(ctx->g, name, ctx->set->half_classes[id->cls - HALF_OFFSET]); } else { ra_set_node_class(ctx->g, name, ctx->set->classes[id->cls]); } } } foreach_src(reg, instr) { if (reg->flags & IR3_REG_ARRAY) { struct ir3_array *arr = ir3_lookup_array(ctx->ir, reg->array.id); arr->start_ip = MIN2(arr->start_ip, instr->ip); arr->end_ip = MAX2(arr->end_ip, instr->ip); /* indirect read is treated like a read fromall array * elements, since we don't know which one is actually * read: */ if (reg->flags & IR3_REG_RELATIV) { unsigned i; for (i = 0; i < arr->length; i++) { unsigned name = arr->base + i; use(name, instr); } } else { unsigned name = arr->base + reg->array.offset; use(name, instr); /* NOTE: arrays are not SSA so unconditionally * set use bit: */ BITSET_SET(bd->use, name); debug_assert(reg->array.offset < arr->length); } } else if ((src = ssa(reg)) && writes_gpr(src)) { unsigned name = ra_name(ctx, &ctx->instrd[src->ip]); use(name, instr); } } } } static bool ra_compute_livein_liveout(struct ir3_ra_ctx *ctx) { unsigned bitset_words = BITSET_WORDS(ctx->alloc_count); bool progress = false; list_for_each_entry (struct ir3_block, block, &ctx->ir->block_list, node) { struct ir3_ra_block_data *bd = block->data; /* update livein: */ for (unsigned i = 0; i < bitset_words; i++) { BITSET_WORD new_livein = (bd->use[i] | (bd->liveout[i] & ~bd->def[i])); if (new_livein & ~bd->livein[i]) { bd->livein[i] |= new_livein; progress = true; } } /* update liveout: */ for (unsigned j = 0; j < ARRAY_SIZE(block->successors); j++) { struct ir3_block *succ = block->successors[j]; struct ir3_ra_block_data *succ_bd; if (!succ) continue; succ_bd = succ->data; for (unsigned i = 0; i < bitset_words; i++) { BITSET_WORD new_liveout = (succ_bd->livein[i] & ~bd->liveout[i]); if (new_liveout) { bd->liveout[i] |= new_liveout; progress = true; } } } } return progress; } static void print_bitset(const char *name, BITSET_WORD *bs, unsigned cnt) { bool first = true; debug_printf(" %s:", name); for (unsigned i = 0; i < cnt; i++) { if (BITSET_TEST(bs, i)) { if (!first) debug_printf(","); debug_printf(" %04u", i); first = false; } } debug_printf("\n"); } static void ra_add_interference(struct ir3_ra_ctx *ctx) { struct ir3 *ir = ctx->ir; /* initialize array live ranges: */ list_for_each_entry (struct ir3_array, arr, &ir->array_list, node) { arr->start_ip = ~0; arr->end_ip = 0; } /* compute live ranges (use/def) on a block level, also updating * block's def/use bitmasks (used below to calculate per-block * livein/liveout): */ list_for_each_entry (struct ir3_block, block, &ir->block_list, node) { ra_block_compute_live_ranges(ctx, block); } /* update per-block livein/liveout: */ while (ra_compute_livein_liveout(ctx)) {} if (ir3_shader_debug & IR3_DBG_OPTMSGS) { debug_printf("AFTER LIVEIN/OUT:\n"); ir3_print(ir); list_for_each_entry (struct ir3_block, block, &ir->block_list, node) { struct ir3_ra_block_data *bd = block->data; debug_printf("block%u:\n", block_id(block)); print_bitset(" def", bd->def, ctx->alloc_count); print_bitset(" use", bd->use, ctx->alloc_count); print_bitset(" l/i", bd->livein, ctx->alloc_count); print_bitset(" l/o", bd->liveout, ctx->alloc_count); } list_for_each_entry (struct ir3_array, arr, &ir->array_list, node) { debug_printf("array%u:\n", arr->id); debug_printf(" length: %u\n", arr->length); debug_printf(" start_ip: %u\n", arr->start_ip); debug_printf(" end_ip: %u\n", arr->end_ip); } } /* extend start/end ranges based on livein/liveout info from cfg: */ list_for_each_entry (struct ir3_block, block, &ir->block_list, node) { struct ir3_ra_block_data *bd = block->data; for (unsigned i = 0; i < ctx->alloc_count; i++) { if (BITSET_TEST(bd->livein, i)) { ctx->def[i] = MIN2(ctx->def[i], block->start_ip); ctx->use[i] = MAX2(ctx->use[i], block->start_ip); } if (BITSET_TEST(bd->liveout, i)) { ctx->def[i] = MIN2(ctx->def[i], block->end_ip); ctx->use[i] = MAX2(ctx->use[i], block->end_ip); } } list_for_each_entry (struct ir3_array, arr, &ctx->ir->array_list, node) { for (unsigned i = 0; i < arr->length; i++) { if (BITSET_TEST(bd->livein, i + arr->base)) { arr->start_ip = MIN2(arr->start_ip, block->start_ip); } if (BITSET_TEST(bd->livein, i + arr->base)) { arr->end_ip = MAX2(arr->end_ip, block->end_ip); } } } } /* need to fix things up to keep outputs live: */ for (unsigned i = 0; i < ir->noutputs; i++) { struct ir3_instruction *instr = ir->outputs[i]; if (!instr) continue; unsigned name = ra_name(ctx, &ctx->instrd[instr->ip]); ctx->use[name] = ctx->instr_cnt; } for (unsigned i = 0; i < ctx->alloc_count; i++) { for (unsigned j = 0; j < ctx->alloc_count; j++) { if (intersects(ctx->def[i], ctx->use[i], ctx->def[j], ctx->use[j])) { ra_add_node_interference(ctx->g, i, j); } } } } /* some instructions need fix-up if dst register is half precision: */ static void fixup_half_instr_dst(struct ir3_instruction *instr) { switch (opc_cat(instr->opc)) { case 1: /* move instructions */ instr->cat1.dst_type = half_type(instr->cat1.dst_type); break; case 3: switch (instr->opc) { case OPC_MAD_F32: instr->opc = OPC_MAD_F16; break; case OPC_SEL_B32: instr->opc = OPC_SEL_B16; break; case OPC_SEL_S32: instr->opc = OPC_SEL_S16; break; case OPC_SEL_F32: instr->opc = OPC_SEL_F16; break; case OPC_SAD_S32: instr->opc = OPC_SAD_S16; break; /* instructions may already be fixed up: */ case OPC_MAD_F16: case OPC_SEL_B16: case OPC_SEL_S16: case OPC_SEL_F16: case OPC_SAD_S16: break; default: assert(0); break; } break; case 5: instr->cat5.type = half_type(instr->cat5.type); break; } } /* some instructions need fix-up if src register is half precision: */ static void fixup_half_instr_src(struct ir3_instruction *instr) { switch (instr->opc) { case OPC_MOV: instr->cat1.src_type = half_type(instr->cat1.src_type); break; default: break; } } /* NOTE: instr could be NULL for IR3_REG_ARRAY case, for the first * array access(es) which do not have any previous access to depend * on from scheduling point of view */ static void reg_assign(struct ir3_ra_ctx *ctx, struct ir3_register *reg, struct ir3_instruction *instr) { struct ir3_ra_instr_data *id; if (reg->flags & IR3_REG_ARRAY) { struct ir3_array *arr = ir3_lookup_array(ctx->ir, reg->array.id); unsigned name = arr->base + reg->array.offset; unsigned r = ra_get_node_reg(ctx->g, name); unsigned num = ctx->set->ra_reg_to_gpr[r]; if (reg->flags & IR3_REG_RELATIV) { reg->array.offset = num; } else { reg->num = num; reg->flags &= ~IR3_REG_SSA; } reg->flags &= ~IR3_REG_ARRAY; } else if ((id = &ctx->instrd[instr->ip]) && id->defn) { unsigned name = ra_name(ctx, id); unsigned r = ra_get_node_reg(ctx->g, name); unsigned num = ctx->set->ra_reg_to_gpr[r] + id->off; debug_assert(!(reg->flags & IR3_REG_RELATIV)); if (is_high(id->defn)) num += FIRST_HIGH_REG; reg->num = num; reg->flags &= ~IR3_REG_SSA; if (is_half(id->defn)) reg->flags |= IR3_REG_HALF; } } static void ra_block_alloc(struct ir3_ra_ctx *ctx, struct ir3_block *block) { list_for_each_entry (struct ir3_instruction, instr, &block->instr_list, node) { struct ir3_register *reg; if (instr->regs_count == 0) continue; if (writes_gpr(instr)) { reg_assign(ctx, instr->regs[0], instr); if (instr->regs[0]->flags & IR3_REG_HALF) fixup_half_instr_dst(instr); } foreach_src_n(reg, n, instr) { struct ir3_instruction *src = reg->instr; /* Note: reg->instr could be null for IR3_REG_ARRAY */ if (!(src || (reg->flags & IR3_REG_ARRAY))) continue; reg_assign(ctx, instr->regs[n+1], src); if (instr->regs[n+1]->flags & IR3_REG_HALF) fixup_half_instr_src(instr); } } } static int ra_alloc(struct ir3_ra_ctx *ctx) { /* pre-assign array elements: */ list_for_each_entry (struct ir3_array, arr, &ctx->ir->array_list, node) { unsigned base = 0; if (arr->end_ip == 0) continue; /* figure out what else we conflict with which has already * been assigned: */ retry: list_for_each_entry (struct ir3_array, arr2, &ctx->ir->array_list, node) { if (arr2 == arr) break; if (arr2->end_ip == 0) continue; /* if it intersects with liverange AND register range.. */ if (intersects(arr->start_ip, arr->end_ip, arr2->start_ip, arr2->end_ip) && intersects(base, base + arr->length, arr2->reg, arr2->reg + arr2->length)) { base = MAX2(base, arr2->reg + arr2->length); goto retry; } } arr->reg = base; for (unsigned i = 0; i < arr->length; i++) { unsigned name, reg; name = arr->base + i; reg = ctx->set->gpr_to_ra_reg[0][base++]; ra_set_node_reg(ctx->g, name, reg); } } if (!ra_allocate(ctx->g)) return -1; list_for_each_entry (struct ir3_block, block, &ctx->ir->block_list, node) { ra_block_alloc(ctx, block); } return 0; } int ir3_ra(struct ir3 *ir, gl_shader_stage type, bool frag_coord, bool frag_face) { struct ir3_ra_ctx ctx = { .ir = ir, .type = type, .frag_face = frag_face, .set = ir->compiler->set, }; int ret; ra_init(&ctx); ra_add_interference(&ctx); ret = ra_alloc(&ctx); ra_destroy(&ctx); return ret; }