/* * Copyright 1995, 1999 by Patrick Lecoanet, France. * * Permission to use, copy, modify, distribute, and sell this software and its * documentation for any purpose is hereby granted without fee, provided that * the above copyright notice appear in all copies and that both that * copyright notice and this permission notice appear in supporting * documentation, and that the name of Patrick Lecoanet not be used in * advertising or publicity pertaining to distribution of the software without * specific, written prior permission. Patrick Lecoanet makes no * representations about the suitability of this software for any purpose. It * is provided "as is" without express or implied warranty. * * PATRICK LECOANET DISCLAIMS ALL WARRANTIES WITH REGARD TO THIS SOFTWARE, * INCLUDING ALL IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS, IN NO * EVENT SHALL PATRICK LECOANET BE LIABLE FOR ANY SPECIAL, INDIRECT OR * CONSEQUENTIAL DAMAGES OR ANY DAMAGES WHATSOEVER RESULTING FROM LOSS OF USE, * DATA OR PROFITS, WHETHER IN AN ACTION OF CONTRACT, NEGLIGENCE OR OTHER * TORTIOUS ACTION, ARISING OUT OF OR IN CONNECTION WITH THE USE OR * PERFORMANCE OF THIS SOFTWARE. * */ /* ******************************************************************************* ******************************************************************************* * * This driver is able to deal with Elographics SmartSet serial controllers. * It uses only a subset of the functions provided through the protocol. * * SUPPORT FOR E281-2310 and compatible controllers added with help of: * 1996/01/17 Juergen P. Meier (jpm@mailserv.rz.fh-muenchen.de) and * 1998/03/25 G.Felkel@edelmann.de * * The E281-2310 is a somewhat lobotomized 2210. * It does not support the c,g,h,k,l,p,q,s and t commands. * Especially the P command, which is used to check the baud rate. * The E281-2310 however semms to use always 9600bps, 8bit, 1stop * no parity, Hardwarehandshake (RTS-CTS) (which are the drivers * default values) * ******************************************************************************* ******************************************************************************* */ #ifdef HAVE_CONFIG_H #include "config.h" #endif #include "xorgVersion.h" #include "misc.h" #include "xf86.h" #include "xf86_OSproc.h" #include "xf86Xinput.h" #include "exevents.h" #include "xf86Module.h" /** * models to be treated specially. */ #define MODEL_UNKNOWN -1 #define MODEL_SUNIT_D 1 typedef struct { int type; const char *name; } Model; static Model SupportedModels[] = { {MODEL_SUNIT_D, "Sunit dSeries"}, /* sunit dSeries models don't reply to queries */ {MODEL_UNKNOWN, NULL} }; /* *************************************************************************** * * Default constants. * *************************************************************************** */ #define ELO_MAX_TRIALS 3 /* Number of timeouts waiting for a */ /* pending reply. */ #define ELO_MAX_WAIT 100000 /* Max wait time for a reply (microsec) */ #define ELO_UNTOUCH_DELAY 5 /* 100 ms */ #define ELO_REPORT_DELAY 1 /* 40 ms or 25 motion reports/s */ #define ELO_LINK_SPEED B9600 /* 9600 Bauds */ #define ELO_PORT "/dev/ttyS1" #define DEFAULT_MAX_X 3000 #define DEFAULT_MIN_X 600 #define DEFAULT_MAX_Y 3000 #define DEFAULT_MIN_Y 600 /* *************************************************************************** * * Protocol constants. * *************************************************************************** */ #define ELO_PACKET_SIZE 10 #define ELO_UNFRAMED_SIZE 8 #define ELO_SYNC_BYTE 'U' /* Sync byte. First of a packet. */ #define ELO_TOUCH 'T' /* Report of touchs and motions. Not * * used by 2310. */ #define ELO_OWNER 'O' /* Report vendor name. */ #define ELO_ID 'I' /* Report of type and features. */ #define ELO_MODE 'M' /* Set current operating mode. */ #define ELO_PARAMETER 'P' /* Set the serial parameters. */ #define ELO_REPORT 'B' /* Set touch reports timings. */ #define ELO_ACK 'A' /* Acknowledge packet */ #define ELO_INIT_CHECKSUM 0xAA /* Initial value of checksum. */ #define ELO_PRESS 0x01 /* Flags in ELO_TOUCH status byte */ #define ELO_STREAM 0x02 #define ELO_RELEASE 0x04 #define ELO_TOUCH_MODE 0x01 /* Flags in ELO_MODE command */ #define ELO_STREAM_MODE 0x02 #define ELO_UNTOUCH_MODE 0x04 #define ELO_RANGE_CHECK_MODE 0x40 #define ELO_TRIM_MODE 0x02 #define ELO_CALIB_MODE 0x04 #define ELO_SCALING_MODE 0x08 #define ELO_TRACKING_MODE 0x40 #define ELO_SERIAL_SPEED 0x06 /* Flags for high speed serial (19200) */ #define ELO_SERIAL_MASK 0xF8 #define ELO_SERIAL_IO '0' /* Indicator byte for PARAMETER command */ /* *************************************************************************** * * Useful macros. * *************************************************************************** */ #define WORD_ASSEMBLY(byte1, byte2) (((byte2) << 8) | (byte1)) #define SYSCALL(call) while(((call) == -1) && (errno == EINTR)) /* This one is handy, thanx Fred ! */ #ifdef DBG #undef DBG #endif #ifdef DEBUG #undef DEBUG #endif static int debug_level = 0; #define DEBUG 1 #if DEBUG #define DBG(lvl, f) {if ((lvl) <= debug_level) f;} #else #define DBG(lvl, f) #endif #undef SYSCALL #undef read #undef write #undef close #define SYSCALL(call) call #define read(fd, ptr, num) xf86ReadSerial(fd, ptr, num) #define write(fd, ptr, num) xf86WriteSerial(fd, ptr, num) #define close(fd) xf86CloseSerial(fd) /* *************************************************************************** * * Device private records. * *************************************************************************** */ typedef struct _EloPrivateRec { char *input_dev; /* The touchscreen input tty */ int min_x; /* Minimum x reported by calibration */ int max_x; /* Maximum x */ int min_y; /* Minimum y reported by calibration */ int max_y; /* Maximum y */ int untouch_delay; /* Delay before reporting an untouch (in ms) */ int report_delay; /* Delay between touch report packets */ int screen_no; /* Screen associated with the device */ int screen_width; /* Width of the associated X screen */ int screen_height; /* Height of the screen */ Bool inited; /* The controller has already been configured ? */ Bool is_a_2310; /* Set if the smartset is a 2310. */ int checksum; /* Current checksum of data in assembly buffer */ int packet_buf_p; /* Assembly buffer pointer */ int swap_axes; /* Swap X an Y axes if != 0 */ unsigned char packet_buf[ELO_PACKET_SIZE]; /* Assembly buffer */ int model; /* one of MODEL_... */ Bool no_framing; /* Whether packets are framed */ } EloPrivateRec, *EloPrivatePtr; /* *************************************************************************** * * xf86EloGetPacket -- * Read a packet from the port. Try to synchronize with start of * packet and compute checksum. * The packet structure read by this function is as follow: * Byte 0 : ELO_SYNC_BYTE * Byte 1 * ... * Byte 8 : packet data * Byte 9 : checksum of bytes 0 to 8 * * This function returns if a valid packet has been assembled in * buffer or if no more data is available. * * Returns Success if a packet is successfully assembled including * testing checksum. If a packet checksum is incorrect, it is discarded. * Bytes preceding the ELO_SYNC_BYTE are also discarded. * Returns !Success if out of data while reading. The start of the * partially assembled packet is left in buffer, buffer_p and * checksum reflect the current state of assembly. * *************************************************************************** */ static Bool xf86EloGetPacket(unsigned char *buffer, int *buffer_p, int *checksum, int fd) { int num_bytes; Bool ok; DBG(4, ErrorF("Entering xf86EloGetPacket with checksum == %d and buffer_p == %d\n", *checksum, *buffer_p)); /* * Try to read enough bytes to fill up the packet buffer. */ DBG(4, ErrorF("buffer_p is %d, Trying to read %d bytes from link\n", *buffer_p, ELO_PACKET_SIZE - *buffer_p)); SYSCALL(num_bytes = read(fd, (char *) (buffer + *buffer_p), ELO_PACKET_SIZE - *buffer_p)); /* * Okay, give up. */ if (num_bytes < 0) { ErrorF("System error while reading from Elographics touchscreen."); return !Success; } DBG(4, ErrorF("Read %d bytes\n", num_bytes)); while (num_bytes) { /* * Sync with the start of a packet. */ if ((*buffer_p == 0) && (buffer[0] != ELO_SYNC_BYTE)) { /* * No match, shift data one byte toward the start of the buffer. */ ErrorF("Elographics: Dropping one byte in an attempt to synchronize: '%c' 0x%X\n", buffer[0], buffer[0]); memcpy(&buffer[0], &buffer[1], num_bytes-1); } else { /* * Compute checksum in assembly buffer. */ if (*buffer_p < ELO_PACKET_SIZE-1) { *checksum = *checksum + buffer[*buffer_p]; *checksum = *checksum % 256; DBG(4, ErrorF(" 0x%X-->0x%X ", buffer[*buffer_p], *checksum)); } (*buffer_p)++; } num_bytes--; } if (*buffer_p == ELO_PACKET_SIZE) { /* * Got a packet, validate checksum and reset state. */ ok = (*checksum == buffer[ELO_PACKET_SIZE-1]); DBG(3, ErrorF("Expecting checksum %d, got %d\n", *checksum, buffer[ELO_PACKET_SIZE-1])); *checksum = ELO_INIT_CHECKSUM; *buffer_p = 0; if (!ok) { ErrorF("Checksum error on Elographics touchscreen link\n"); return !Success; } /* * Valid packet received report it. */ return Success; } else { return !Success; } } /* *************************************************************************** * * xf86EloGetUnframedPacket -- * Read an unframed packet from the port * The packet structure read by this function is as follow: * Byte 0 : ELO_TOUCH * Byte 1 * ... * Byte 8 : packet data * * This function returns if a valid packet has been assembled in * buffer or if no more data is available. * * *************************************************************************** */ static Bool xf86EloGetUnframedPacket(unsigned char *buffer, int fd) { int num_bytes; Bool ok; SYSCALL(num_bytes = read(fd, (char *) (buffer), ELO_UNFRAMED_SIZE)); /* * Okay, give up. */ if (num_bytes != ELO_UNFRAMED_SIZE) { ErrorF("System error while reading from Elographics touchscreen."); return !Success; } DBG(4, ErrorF("Read %d bytes\n", num_bytes)); return Success; } /* *************************************************************************** * * xf86EloReadInput -- * Read all pending report packets from the touchscreen and enqueue * them. * If a packet is not fully received it is deferred until the next * call to the function. * Packets recognized by this function comply with the format: * * Byte 1 : ELO_TOUCH * Byte 2 : Packet type * Bit 2 : Pen Up (Release) * Bit 1 : Position (Stream) * Bit 0 : Pen Down (Press) * Byte 3 : X coordinate (lower bits) * Byte 4 : X coordinate (upper bits) * Byte 5 : Y coordinate (lower bits) * Byte 6 : Y coordinate (upper bits) * Byte 7 : Z coordinate (lower bits) * Byte 8 : Z coordinates (upper bits) * * *************************************************************************** */ static void xf86EloReadInput(InputInfoPtr pInfo) { EloPrivatePtr priv = (EloPrivatePtr)(pInfo->private); int cur_x, cur_y; int state; DBG(4, ErrorF("Entering ReadInput\n")); /* * Read bytes until there's no data left. We may have more or less than * one packet worth of data in the OS buffer. */ do { if (priv->no_framing) { if(xf86EloGetUnframedPacket(&priv->packet_buf[1], pInfo->fd) != Success) continue; } else { if(xf86EloGetPacket(priv->packet_buf, &priv->packet_buf_p, &priv->checksum, pInfo->fd) != Success) continue; } /* * Process only ELO_TOUCHs here. */ if (priv->packet_buf[1] == ELO_TOUCH) { /* * First stick together the various pieces. */ cur_x = WORD_ASSEMBLY(priv->packet_buf[3], priv->packet_buf[4]); cur_y = WORD_ASSEMBLY(priv->packet_buf[5], priv->packet_buf[6]); state = priv->packet_buf[2] & 0x07; DBG(5, ErrorF("ELO got: x(%d), y(%d), %s\n", cur_x, cur_y, (state == ELO_PRESS) ? "Press" : ((state == ELO_RELEASE) ? "Release" : "Stream"))); if (priv->min_y > priv->max_y) { /* inverted y axis */ cur_y = priv->max_y - cur_y + priv->min_y; } if (priv->min_x > priv->max_x) { /* inverted x axis */ cur_x = priv->max_x - cur_x + priv->min_x; } /* * Send events. * * We *must* generate a motion before a button change if pointer * location has changed as DIX assumes this. This is why we always * emit a motion, regardless of the kind of packet processed. */ xf86PostMotionEvent(pInfo->dev, TRUE, 0, 2, cur_x, cur_y); /* * Emit a button press or release. */ if (state == ELO_PRESS || state == ELO_RELEASE) { xf86PostButtonEvent(pInfo->dev, TRUE, 1, state == ELO_PRESS, 0, 2, cur_x, cur_y); } DBG(3, ErrorF("TouchScreen: x(%d), y(%d), %s\n", cur_x, cur_y, (state == ELO_PRESS) ? "Press" : ((state == ELO_RELEASE) ? "Release" : "Stream"))); } } while (xf86WaitForInput(pInfo->fd, 0) > 0); /* don't wait, just check */ } /* *************************************************************************** * * xf86EloSendPacket -- * Emit an height bytes packet to the controller. * The function expects a valid buffer containing the * command to be sent to the controller. It fills it with the * leading sync character an the trailing checksum byte. * *************************************************************************** */ static Bool xf86EloSendPacket(unsigned char *packet, int fd) { int i, result; int sum = ELO_INIT_CHECKSUM; packet[0] = ELO_SYNC_BYTE; for (i = 0; i < ELO_PACKET_SIZE-1; i++) { sum += packet[i]; sum &= 0xFF; } packet[ELO_PACKET_SIZE-1] = sum; DBG(4, ErrorF("Sending packet : 0x%X 0x%X 0x%X 0x%X 0x%X 0x%X 0x%X 0x%X 0x%X 0x%X \n", packet[0], packet[1], packet[2], packet[3], packet[4], packet[5], packet[6], packet[7], packet[8], packet[9])); SYSCALL(result = write(fd, packet, ELO_PACKET_SIZE)); if (result != ELO_PACKET_SIZE) { DBG(5, ErrorF("System error while sending to Elographics touchscreen.\n")); return !Success; } else { return Success; } } /* *************************************************************************** * * xf86EloWaitReply -- * It is assumed that the reply will be in the few next bytes * read and will be available very soon after the query post. if * these two asumptions are not met, there are chances that the server * will be stuck for a while. * The reply type need to match parameter 'type'. * The reply is left in reply. The function returns Success if the * reply is valid and !Success otherwise. * *************************************************************************** */ static Bool xf86EloWaitReply(unsigned char type, unsigned char *reply, int fd) { Bool ok; int i, result; int reply_p = 0; int sum = ELO_INIT_CHECKSUM; DBG(4, ErrorF("Waiting a '%c' reply\n", type)); i = ELO_MAX_TRIALS; do { ok = !Success; /* * Wait half a second for the reply. The fuse counts down each * timeout and each wrong packet. */ DBG(4, ErrorF("Waiting %d ms for data from port\n", ELO_MAX_WAIT / 1000)); result = xf86WaitForInput(fd, ELO_MAX_WAIT); if (result > 0) { ok = xf86EloGetPacket(reply, &reply_p, &sum, fd); /* * Do not report an error on a 'P' query as the controller * might be a 2310. */ if (ok == Success && reply[1] != type && type != ELO_PARAMETER) { DBG(3, ErrorF("Wrong reply received\n")); ok = !Success; } } else { DBG(3, ErrorF("No answer from link : %d\n", result)); } if (result == 0) { i--; } } while(ok != Success && i); return ok; } /* *************************************************************************** * * xf86EloWaitAck -- * Wait for an acknowledge from the controller. Returns Success if * acknowledge received and reported no errors. * *************************************************************************** */ static Bool xf86EloWaitAck(int fd) { unsigned char packet[ELO_PACKET_SIZE]; int i, nb_errors; if (xf86EloWaitReply(ELO_ACK, packet, fd) == Success) { for (i = 0, nb_errors = 0; i < 4; i++) { if (packet[2 + i] != '0') { nb_errors++; } } if (nb_errors != 0) { DBG(2, ErrorF("Elographics acknowledge packet reports %d errors\n", nb_errors)); } return Success; /* return (nb_errors < 4) ? Success : !Success;*/ } else { return !Success; } } /* *************************************************************************** * * xf86EloSendQuery -- * Emit a query to the controller and blocks until the reply and * the acknowledge are read. * * The reply is left in reply. The function returns Success if the * reply is valid and !Success otherwise. * *************************************************************************** */ static Bool xf86EloSendQuery(unsigned char *request, unsigned char *reply, int fd) { Bool ok; if (xf86EloSendPacket(request, fd) == Success) { ok = xf86EloWaitReply(toupper(request[1]), reply, fd); if (ok == Success) { ok = xf86EloWaitAck(fd); } return ok; } else { return !Success; } } /* *************************************************************************** * * xf86EloSendControl -- * Emit a control command to the controller and wait for acknowledge. * * Returns Success if acknowledge received and reported no error. * *************************************************************************** */ static Bool xf86EloSendControl(unsigned char *control, int fd) { if (xf86EloSendPacket(control, fd) == Success) { return xf86EloWaitAck(fd); } else { return !Success; } } /* *************************************************************************** * * xf86EloPrintIdent -- * Print type of touchscreen and features on controller board. * *************************************************************************** */ static void xf86EloPrintIdent(unsigned char *packet, EloPrivatePtr priv) { xf86Msg(X_PROBED, "Elographics touchscreen is a "); switch(packet[2]) { case '0': xf86Msg(X_NONE, "AccuTouch"); break; case '1': xf86Msg(X_NONE, "DuraTouch"); break; case '2': xf86Msg(X_NONE, "Intellitouch"); break; } xf86Msg(X_NONE, ", connected through a "); switch(packet[3]) { case '0': xf86Msg(X_NONE, "serial link.\n"); break; case '1': xf86Msg(X_NONE, "PC-Bus port.\n"); break; case '2': xf86Msg(X_NONE, "Micro Channel port.\n"); break; } xf86Msg(X_PROBED, "The controller is a model "); if (packet[8] & 1) { if (priv->is_a_2310) { xf86Msg(X_NONE, "E281-2310"); } else { xf86Msg(X_NONE, "E271-2210"); } } else { xf86Msg(X_NONE, "E271-2200"); } xf86Msg(X_NONE, ", firmware revision %d.%d.\n", packet[6], packet[5]); if (packet[4]) { xf86Msg(X_PROBED, " Additional features:\n"); if (packet[4] & 0x10) { xf86Msg(X_PROBED, " External A/D converter\n"); } if (packet[4] & 0x20) { xf86Msg(X_PROBED, " 32Ko RAM\n"); } if (packet[4] & 0x40) { xf86Msg(X_PROBED, " RAM onboard\n"); } if (packet[4] & 0x80) { xf86Msg(X_PROBED, " Z axis active\n"); } xf86Msg(X_NONE, "\n"); } } /* *************************************************************************** * * xf86EloPtrControl -- * *************************************************************************** */ static void xf86EloPtrControl(DeviceIntPtr dev, PtrCtrl *ctrl) { } /* *************************************************************************** * * xf86EloControl -- * *************************************************************************** */ static Bool xf86EloControl(DeviceIntPtr dev, int mode) { InputInfoPtr pInfo = (InputInfoPtr) dev->public.devicePrivate; EloPrivatePtr priv = (EloPrivatePtr)(pInfo->private); unsigned char map[] = { 0, 1 }; unsigned char req[ELO_PACKET_SIZE]; unsigned char reply[ELO_PACKET_SIZE]; Atom btn_label; Atom axis_labels[2] = { 0, 0 }; int x0, x1, y0, y1; switch(mode) { case DEVICE_INIT: { DBG(2, ErrorF("Elographics touchscreen init...\n")); if (priv->screen_no >= screenInfo.numScreens || priv->screen_no < 0) { priv->screen_no = 0; } priv->screen_width = screenInfo.screens[priv->screen_no]->width; priv->screen_height = screenInfo.screens[priv->screen_no]->height; /* * Device reports button press for up to 1 button. */ if (InitButtonClassDeviceStruct(dev, 1, &btn_label, map) == FALSE) { ErrorF("Unable to allocate Elographics touchscreen ButtonClassDeviceStruct\n"); return !Success; } if (InitFocusClassDeviceStruct(dev) == FALSE) { ErrorF("Unable to allocate Elographics touchscreen FocusClassDeviceStruct\n"); return !Success; } if (InitPtrFeedbackClassDeviceStruct(dev, xf86EloPtrControl) == FALSE) { ErrorF("unable to init ptr feedback\n"); return !Success; } /* * Device reports motions on 2 axes in absolute coordinates. * Axes min and max values are reported in raw coordinates. * Resolution is computed roughly by the difference between * max and min values scaled from the approximate size of the * screen to fit one meter. */ if (InitValuatorClassDeviceStruct(dev, 2, axis_labels, GetMotionHistorySize(), Absolute) == FALSE) { ErrorF("Unable to allocate Elographics touchscreen ValuatorClassDeviceStruct\n"); return !Success; } else { /* Correct the coordinates for possibly inverted axis. Leave priv->variables untouched so we can check for inversion on incoming events. */ y0 = min(priv->min_y, priv->max_y); y1 = max(priv->min_y, priv->max_y); x0 = min(priv->min_x, priv->max_x); x1 = max(priv->min_x, priv->max_x); /* I will map coordinates myself */ InitValuatorAxisStruct(dev, 0, axis_labels[0], x0, x1, 9500, 0 /* min_res */, 9500 /* max_res */, Absolute); InitValuatorAxisStruct(dev, 1, axis_labels[1], y0, y1, 10500, 0 /* min_res */, 10500 /* max_res */, Absolute); } if (InitFocusClassDeviceStruct(dev) == FALSE) { ErrorF("Unable to allocate Elographics touchscreen FocusClassDeviceStruct\n"); } /* * Allocate the motion events buffer. */ xf86MotionHistoryAllocate(pInfo); DBG(2, ErrorF("Done.\n")); return Success; } case DEVICE_ON: DBG(2, ErrorF("Elographics touchscreen on...\n")); if (pInfo->fd < 0) { DBG(2, ErrorF("Elographics touchscreen opening : %s\n", priv->input_dev)); pInfo->fd = xf86OpenSerial(pInfo->options); if (pInfo->fd < 0) { ErrorF("Unable to open Elographics touchscreen device"); return !Success; } if (priv->model != MODEL_SUNIT_D) { /* * Try to see if the link is at the specified rate and * ask the controller to report various infos. */ memset(req, 0, ELO_PACKET_SIZE); req[1] = tolower(ELO_PARAMETER); if (xf86EloSendQuery(req, reply, pInfo->fd) != Success) { priv->is_a_2310 = 1; ErrorF("Not at the specified rate or model 2310, will continue\n"); } /* * Ask the controller to report various infos. */ memset(req, 0, ELO_PACKET_SIZE); req[1] = tolower(ELO_ID); if (xf86EloSendQuery(req, reply, pInfo->fd) == Success) { xf86EloPrintIdent(reply, priv); } else { DBG(2, ErrorF("Unable to ask Elographics touchscreen identification... Maybe it's GeneralTouch touchscreen...\n")); } /* * Set the operating mode: Stream, no scaling, no calibration, * no range checking, no trim, tracking enabled. */ memset(req, 0, ELO_PACKET_SIZE); req[1] = ELO_MODE; req[3] = ELO_TOUCH_MODE | ELO_STREAM_MODE | ELO_UNTOUCH_MODE; req[4] = ELO_TRACKING_MODE; if (xf86EloSendControl(req, pInfo->fd) != Success) { DBG(2, ErrorF("Unable to change Elographics touchscreen operating mode... Maybe it's GeneralTouch touchscreen...\n")); } /* * Set the touch reports timings from configuration data. */ memset(req, 0, ELO_PACKET_SIZE); req[1] = ELO_REPORT; req[2] = priv->untouch_delay; req[3] = priv->report_delay; if (xf86EloSendControl(req, pInfo->fd) != Success) { DBG(2, ErrorF("Unable to change Elographics touchscreen reports timings... Maybe it's GeneralTouch touchscreen...\n")); } } xf86AddEnabledDevice(pInfo); dev->public.on = TRUE; } DBG(2, ErrorF("Done\n")); return Success; /* * Deactivate the device. After this, the device will not emit * events until a subsequent DEVICE_ON. Thus, we can momentarily * close the port. */ case DEVICE_OFF: DBG(2, ErrorF("Elographics touchscreen off...\n")); dev->public.on = FALSE; if (pInfo->fd >= 0) { xf86RemoveEnabledDevice(pInfo); } SYSCALL(close(pInfo->fd)); pInfo->fd = -1; DBG(2, ErrorF("Done\n")); return Success; /* * Final close before server exit. This is used during server shutdown. * Close the port and free all the resources. */ case DEVICE_CLOSE: DBG(2, ErrorF("Elographics touchscreen close...\n")); dev->public.on = FALSE; if (pInfo->fd >= 0) { xf86RemoveEnabledDevice(pInfo); } SYSCALL(close(pInfo->fd)); pInfo->fd = -1; DBG(2, ErrorF("Done\n")); return Success; #if GET_ABI_MAJOR(ABI_XINPUT_VERSION) * 100 + GET_ABI_MINOR(ABI_XINPUT_VERSION) >= 1901 case DEVICE_ABORT: return Success; #endif default: ErrorF("unsupported mode=%d\n", mode); return BadValue; } } /* *************************************************************************** * * xf86EloAllocate -- * *************************************************************************** */ static int xf86EloAllocate(InputDriverPtr drv, InputInfoPtr pInfo) { EloPrivatePtr priv; priv = malloc(sizeof(EloPrivateRec)); if (!priv) return BadAlloc; priv->input_dev = strdup(ELO_PORT); priv->min_x = 0; priv->max_x = 3000; priv->min_y = 0; priv->max_y = 3000; priv->untouch_delay = ELO_UNTOUCH_DELAY; priv->report_delay = ELO_REPORT_DELAY; priv->screen_no = 0; priv->screen_width = -1; priv->screen_height = -1; priv->inited = 0; priv->is_a_2310 = 0; priv->checksum = ELO_INIT_CHECKSUM; priv->packet_buf_p = 0; priv->swap_axes = 0; priv->no_framing = 0; pInfo->device_control = xf86EloControl; pInfo->read_input = xf86EloReadInput; pInfo->control_proc = NULL; pInfo->switch_mode = NULL; pInfo->private = priv; pInfo->type_name = XI_TOUCHSCREEN; return Success; } static void xf86EloUninit(InputDriverPtr drv, InputInfoPtr pInfo, int flags) { EloPrivatePtr priv = (EloPrivatePtr) pInfo->private; free(priv->input_dev); free(priv); pInfo->private = NULL; xf86DeleteInput(pInfo, 0); } static #if GET_ABI_MAJOR(ABI_XINPUT_VERSION) >= 18 const #endif char *default_options[] = { "BaudRate", "9600", "StopBits", "1", "DataBits", "8", "Parity", "None", "FlowControl", "None", NULL }; static int xf86EloInit(InputDriverPtr drv, InputInfoPtr pInfo, int flags) { EloPrivatePtr priv=NULL; const char *str; int portrait = 0; int height, width; char *opt_model; Model* model; int rc; rc = xf86EloAllocate(drv, pInfo); if (rc != Success) return rc; priv = pInfo->private; str = xf86SetStrOption(pInfo->options, "Device", NULL); if (!str) { xf86Msg(X_ERROR, "%s: No Device specified in Elographics module config.\n", pInfo->name); return BadValue; } else { pInfo->fd = xf86OpenSerial(pInfo->options); if (pInfo->fd < 0) { xf86Msg(X_ERROR, "%s: Unable to open Elographics touchscreen device %s", pInfo->name, str); return BadValue; } xf86CloseSerial(pInfo->fd); pInfo->fd = -1; } priv->input_dev = strdup(str); opt_model = xf86SetStrOption(pInfo->options, "Model", NULL); model = SupportedModels; priv->model = MODEL_UNKNOWN; while(model->type != MODEL_UNKNOWN && opt_model) { if (!strcmp(model->name, opt_model)) { priv->model = model->type; break; } model++; } priv->screen_no = xf86SetIntOption(pInfo->options, "ScreenNo", 0); xf86Msg(X_CONFIG, "Elographics associated screen: %d\n", priv->screen_no); priv->untouch_delay = xf86SetIntOption(pInfo->options, "UntouchDelay", ELO_UNTOUCH_DELAY); xf86Msg(X_CONFIG, "Elographics untouch delay: %d ms\n", priv->untouch_delay*10); priv->report_delay = xf86SetIntOption(pInfo->options, "ReportDelay", ELO_REPORT_DELAY); xf86Msg(X_CONFIG, "Elographics report delay: %d ms\n", priv->report_delay*10); priv->max_x = xf86SetIntOption(pInfo->options, "MaxX", 3000); xf86Msg(X_CONFIG, "Elographics maximum x position: %d\n", priv->max_x); priv->min_x = xf86SetIntOption(pInfo->options, "MinX", 0); xf86Msg(X_CONFIG, "Elographics minimum x position: %d\n", priv->min_x); priv->max_y = xf86SetIntOption(pInfo->options, "MaxY", 3000); xf86Msg(X_CONFIG, "Elographics maximum y position: %d\n", priv->max_y); priv->min_y = xf86SetIntOption(pInfo->options, "MinY", 0); xf86Msg(X_CONFIG, "Elographics minimum y position: %d\n", priv->min_y); priv->swap_axes = xf86SetBoolOption(pInfo->options, "SwapXY", 0); if (priv->swap_axes) { xf86Msg(X_CONFIG, "Elographics device will work with X and Y axes swapped\n"); } priv->no_framing = xf86SetIntOption(pInfo->options, "NoFraming", 0); xf86Msg(X_CONFIG, "Elographics no framing: %d\n", priv->no_framing); debug_level = xf86SetIntOption(pInfo->options, "DebugLevel", 0); if (debug_level) { #if DEBUG xf86Msg(X_CONFIG, "Elographics debug level sets to %d\n", debug_level); #else xf86Msg(X_INFO, "Elographics debug not available\n"); #endif } str = xf86SetStrOption(pInfo->options, "PortraitMode", "Landscape"); if (strcmp(str, "Portrait") == 0) { portrait = 1; } else if (strcmp(str, "PortraitCCW") == 0) { portrait = -1; } else if (strcmp(str, "Landscape") != 0) { xf86Msg(X_ERROR, "Elographics portrait mode should be: Portrait, Landscape or PortraitCCW"); str = "Landscape"; } xf86Msg(X_CONFIG, "Elographics device will work in %s mode\n", str); width = priv->max_x - priv->min_x; height = priv->max_y - priv->min_y; if (width == 0) { xf86Msg(X_ERROR, "Elographics: Cannot configure touchscreen with width 0\n"); return BadValue; } else if (width < 0) { xf86Msg(X_INFO, "Elographics: reverse x mode (minimum x position >= maximum x position)\n"); } if (height == 0) { xf86Msg(X_ERROR, "Elographics: Cannot configure touchscreen with height 0\n"); return BadValue; } else if (height < 0) { xf86Msg(X_INFO, "Elographics: reverse y mode (minimum y position >= maximum y position)\n"); } if (portrait == 1) { /* * Portrait Clockwise: reverse Y axis and exchange X and Y. */ int tmp; tmp = priv->min_y; priv->min_y = priv->max_y; priv->max_y = tmp; priv->swap_axes = (priv->swap_axes==0) ? 1 : 0; } else if (portrait == -1) { /* * Portrait Counter Clockwise: reverse X axis and exchange X and Y. */ int tmp; tmp = priv->min_x; priv->min_x = priv->max_x; priv->max_x = tmp; priv->swap_axes = (priv->swap_axes==0) ? 1 : 0; } return Success; } _X_EXPORT InputDriverRec ELOGRAPHICS = { 1, /* driver version */ "elographics", /* driver name */ NULL, /* identify */ xf86EloInit, /* pre-init */ xf86EloUninit, /* un-init */ NULL, /* module */ default_options }; static pointer Plug(pointer module, pointer options, int *errmaj, int *errmin) { xf86AddInputDriver(&ELOGRAPHICS, module, 0); return module; } static void Unplug(pointer p) { DBG(1, ErrorF("EloUnplug\n")); } static XF86ModuleVersionInfo version_rec = { "elographics", MODULEVENDORSTRING, MODINFOSTRING1, MODINFOSTRING2, XORG_VERSION_CURRENT, PACKAGE_VERSION_MAJOR, PACKAGE_VERSION_MINOR, PACKAGE_VERSION_PATCHLEVEL, ABI_CLASS_XINPUT, ABI_XINPUT_VERSION, MOD_CLASS_XINPUT, { 0, 0, 0, 0 } }; /* * This is the entry point in the module. The name * is setup after the pattern ModuleData. * Do not change it. */ _X_EXPORT XF86ModuleData elographicsModuleData = { &version_rec, Plug, Unplug };