/* $NetBSD: iscsic_driverif.c,v 1.6 2012/06/25 20:39:54 mlelstv Exp $ */
/*-
* Copyright (c) 2005,2006,2011 The NetBSD Foundation, Inc.
* All rights reserved.
*
* This code is derived from software contributed to The NetBSD Foundation
* by Wasabi Systems, Inc.
*
* Redistribution and use in source and binary forms, with or without
* modification, are permitted provided that the following conditions
* are met:
* 1. Redistributions of source code must retain the above copyright
* notice, this list of conditions and the following disclaimer.
* 2. Redistributions in binary form must reproduce the above copyright
* notice, this list of conditions and the following disclaimer in the
* documentation and/or other materials provided with the distribution.
*
* THIS SOFTWARE IS PROVIDED BY THE NETBSD FOUNDATION, INC. AND CONTRIBUTORS
* ``AS IS'' AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED
* TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR
* PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE FOUNDATION OR CONTRIBUTORS
* BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR
* CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF
* SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS
* INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN
* CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
* ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
* POSSIBILITY OF SUCH DAMAGE.
*/
#include "iscsic_globals.h"
#include <ctype.h>
#include <inttypes.h>
typedef struct {
uint8_t asc;
uint8_t ascq;
const char *key;
} asc_tab_t;
asc_tab_t asctab[] = {
{0x00, 0x01, "FILEMARK DETECTED"},
{0x00, 0x02, "END-OF-PARTITION/MEDIUM DETECTED"},
{0x00, 0x03, "SETMARK DETECTED"},
{0x00, 0x04, "BEGINNING-OF-PARTITION/MEDIUM DETECTED"},
{0x00, 0x05, "END-OF-DATA DETECTED"},
{0x00, 0x06, "I/O PROCESS TERMINATED"},
{0x00, 0x11, "AUDIO PLAY OPERATION IN PROGRESS"},
{0x00, 0x12, "AUDIO PLAY OPERATION PAUSED"},
{0x00, 0x13, "AUDIO PLAY OPERATION SUCCESSFULLY COMPLETED"},
{0x00, 0x14, "AUDIO PLAY OPERATION STOPPED DUE TO ERROR"},
{0x00, 0x15, "NO CURRENT AUDIO STATUS TO RETURN"},
{0x01, 0x00, "NO INDEX/SECTOR SIGNAL"},
{0x02, 0x00, "NO SEEK COMPLETE"},
{0x03, 0x00, "PERIPHERAL DEVICE WRITE FAULT"},
{0x03, 0x01, "NO WRITE CURRENT"},
{0x03, 0x02, "EXCESSIVE WRITE ERRORS"},
{0x04, 0x00, "LOGICAL UNIT NOT READY, CAUSE NOT REPORTABLE"},
{0x04, 0x01, "LOGICAL UNIT IS IN PROCESS OF BECOMING READY"},
{0x04, 0x02, "LOGICAL UNIT NOT READY, INITIALIZING COMMAND REQUIRED"},
{0x04, 0x03, "LOGICAL UNIT NOT READY, MANUAL INTERVENTION REQUIRED"},
{0x04, 0x04, "LOGICAL UNIT NOT READY, FORMAT IN PROGRESS"},
{0x05, 0x00, "LOGICAL UNIT DOES NOT RESPOND TO SELECTION"},
{0x06, 0x00, "NO REFERENCE POSITION FOUND"},
{0x07, 0x00, "MULTIPLE PERIPHERAL DEVICES SELECTED"},
{0x08, 0x00, "LOGICAL UNIT COMMUNICATION FAILURE"},
{0x08, 0x01, "LOGICAL UNIT COMMUNICATION TIME-OUT"},
{0x08, 0x02, "LOGICAL UNIT COMMUNICATION PARITY ERROR"},
{0x09, 0x00, "TRACK FOLLOWING ERROR"},
{0x09, 0x01, "TRACKING SERVO FAILURE"},
{0x09, 0x02, "FOCUS SERVO FAILURE"},
{0x09, 0x03, "SPINDLE SERVO FAILURE"},
{0x0A, 0x00, "ERROR LOG OVERFLOW"},
{0x0C, 0x00, "WRITE ERROR"},
{0x0C, 0x01, "WRITE ERROR RECOVERED WITH AUTO REALLOCATION"},
{0x0C, 0x02, "WRITE ERROR - AUTO REALLOCATION FAILED"},
{0x10, 0x00, "ID CRC OR ECC ERROR"},
{0x11, 0x00, "UNRECOVERED READ ERROR"},
{0x11, 0x01, "READ RETRIES EXHAUSTED"},
{0x11, 0x02, "ERROR TOO LONG TO CORRECT"},
{0x11, 0x03, "MULTIPLE READ ERRORS"},
{0x11, 0x04, "UNRECOVERED READ ERROR - AUTO REALLOCATE FAILED"},
{0x11, 0x05, "L-EC UNCORRECTABLE ERROR"},
{0x11, 0x06, "CIRC UNRECOVERED ERROR"},
{0x11, 0x07, "DATA RESYNCHRONIZATION ERROR"},
{0x11, 0x08, "INCOMPLETE BLOCK READ"},
{0x11, 0x09, "NO GAP FOUND"},
{0x11, 0x0A, "MISCORRECTED ERROR"},
{0x11, 0x0B, "UNRECOVERED READ ERROR - RECOMMEND REASSIGNMENT"},
{0x11, 0x0C, "UNRECOVERED READ ERROR - RECOMMEND REWRITE THE DATA"},
{0x12, 0x00, "ADDRESS MARK NOT FOUND FOR ID FIELD"},
{0x13, 0x00, "ADDRESS MARK NOT FOUND FOR DATA FIELD"},
{0x14, 0x00, "RECORDED ENTITY NOT FOUND"},
{0x14, 0x01, "RECORD NOT FOUND"},
{0x14, 0x02, "FILEMARK OR SETMARK NOT FOUND"},
{0x14, 0x03, "END-OF-DATA NOT FOUND"},
{0x14, 0x04, "BLOCK SEQUENCE ERROR"},
{0x15, 0x00, "RANDOM POSITIONING ERROR"},
{0x15, 0x01, "MECHANICAL POSITIONING ERROR"},
{0x15, 0x02, "POSITIONING ERROR DETECTED BY READ OF MEDIUM"},
{0x16, 0x00, "DATA SYNCHRONIZATION MARK ERROR"},
{0x17, 0x00, "RECOVERED DATA WITH NO ERROR CORRECTION APPLIED"},
{0x17, 0x01, "RECOVERED DATA WITH RETRIES"},
{0x17, 0x02, "RECOVERED DATA WITH POSITIVE HEAD OFFSET"},
{0x17, 0x03, "RECOVERED DATA WITH NEGATIVE HEAD OFFSET"},
{0x17, 0x04, "RECOVERED DATA WITH RETRIES AND/OR CIRC APPLIED"},
{0x17, 0x05, "RECOVERED DATA USING PREVIOUS SECTOR ID"},
{0x17, 0x06, "RECOVERED DATA WITHOUT ECC - DATA AUTO-REALLOCATED"},
{0x17, 0x07, "RECOVERED DATA WITHOUT ECC - RECOMMEND REASSIGNMENT"},
{0x17, 0x08, "RECOVERED DATA WITHOUT ECC - RECOMMEND REWRITE"},
{0x18, 0x00, "RECOVERED DATA WITH ERROR CORRECTION APPLIED"},
{0x18, 0x01, "RECOVERED DATA WITH ERROR CORRECTION & RETRIES APPLIED"},
{0x18, 0x02, "RECOVERED DATA - DATA AUTO-REALLOCATED"},
{0x18, 0x03, "RECOVERED DATA WITH CIRC"},
{0x18, 0x04, "RECOVERED DATA WITH L-EC"},
{0x18, 0x05, "RECOVERED DATA - RECOMMEND REASSIGNMENT"},
{0x18, 0x06, "RECOVERED DATA - RECOMMEND REWRITE"},
{0x19, 0x00, "DEFECT LIST ERROR"},
{0x19, 0x01, "DEFECT LIST NOT AVAILABLE"},
{0x19, 0x02, "DEFECT LIST ERROR IN PRIMARY LIST"},
{0x19, 0x03, "DEFECT LIST ERROR IN GROWN LIST"},
{0x1A, 0x00, "PARAMETER LIST LENGTH ERROR"},
{0x1B, 0x00, "SYNCHRONOUS DATA TRANSFER ERROR"},
{0x1C, 0x00, "DEFECT LIST NOT FOUND"},
{0x1C, 0x01, "PRIMARY DEFECT LIST NOT FOUND"},
{0x1C, 0x02, "GROWN DEFECT LIST NOT FOUND"},
{0x1D, 0x00, "MISCOMPARE DURING VERIFY OPERATION"},
{0x1E, 0x00, "RECOVERED ID WITH ECC CORRECTION"},
{0x20, 0x00, "INVALID COMMAND OPERATION CODE"},
{0x21, 0x00, "LOGICAL BLOCK ADDRESS OUT OF RANGE"},
{0x21, 0x01, "INVALID ELEMENT ADDRESS"},
{0x22, 0x00, "ILLEGAL FUNCTION"},
{0x24, 0x00, "INVALID FIELD IN CDB"},
{0x25, 0x00, "LOGICAL UNIT NOT SUPPORTED"},
{0x26, 0x00, "INVALID FIELD IN PARAMETER LIST"},
{0x26, 0x01, "PARAMETER NOT SUPPORTED"},
{0x26, 0x02, "PARAMETER VALUE INVALID"},
{0x26, 0x03, "THRESHOLD PARAMETERS NOT SUPPORTED"},
{0x27, 0x00, "WRITE PROTECTED"},
{0x28, 0x00, "NOT READY TO READY TRANSITION, MEDIUM MAY HAVE CHANGED"},
{0x28, 0x01, "IMPORT OR EXPORT ELEMENT ACCESSED"},
{0x29, 0x00, "POWER ON, RESET, OR BUS DEVICE RESET OCCURRED"},
{0x2A, 0x00, "PARAMETERS CHANGED"},
{0x2A, 0x01, "MODE PARAMETERS CHANGED"},
{0x2A, 0x02, "LOG PARAMETERS CHANGED"},
{0x2B, 0x00, "COPY CANNOT EXECUTE SINCE HOST CANNOT DISCONNECT"},
{0x2C, 0x00, "COMMAND SEQUENCE ERROR"},
{0x2C, 0x01, "TOO MANY WINDOWS SPECIFIED"},
{0x2C, 0x02, "INVALID COMBINATION OF WINDOWS SPECIFIED"},
{0x2D, 0x00, "OVERWRITE ERROR ON UPDATE IN PLACE"},
{0x2F, 0x00, "COMMANDS CLEARED BY ANOTHER INITIATOR"},
{0x30, 0x00, "INCOMPATIBLE MEDIUM INSTALLED"},
{0x30, 0x01, "CANNOT READ MEDIUM - UNKNOWN FORMAT"},
{0x30, 0x02, "CANNOT READ MEDIUM - INCOMPATIBLE FORMAT"},
{0x30, 0x03, "CLEANING CARTRIDGE INSTALLED"},
{0x31, 0x00, "MEDIUM FORMAT CORRUPTED"},
{0x31, 0x01, "FORMAT COMMAND FAILED"},
{0x32, 0x00, "NO DEFECT SPARE LOCATION AVAILABLE"},
{0x32, 0x01, "DEFECT LIST UPDATE FAILURE"},
{0x33, 0x00, "TAPE LENGTH ERROR"},
{0x36, 0x00, "RIBBON, INK, OR TONER FAILURE"},
{0x37, 0x00, "ROUNDED PARAMETER"},
{0x39, 0x00, "SAVING PARAMETERS NOT SUPPORTED"},
{0x3A, 0x00, "MEDIUM NOT PRESENT"},
{0x3B, 0x00, "SEQUENTIAL POSITIONING ERROR"},
{0x3B, 0x01, "TAPE POSITION ERROR AT BEGINNING-OF-MEDIUM"},
{0x3B, 0x02, "TAPE POSITION ERROR AT END-OF-MEDIUM"},
{0x3B, 0x03, "TAPE OR ELECTRONIC VERTICAL FORMS UNIT NOT READY"},
{0x3B, 0x04, "SLEW FAILURE"},
{0x3B, 0x05, "PAPER JAM"},
{0x3B, 0x06, "FAILED TO SENSE TOP-OF-FORM"},
{0x3B, 0x07, "FAILED TO SENSE BOTTOM-OF-FORM"},
{0x3B, 0x08, "REPOSITION ERROR"},
{0x3B, 0x09, "READ PAST END OF MEDIUM"},
{0x3B, 0x0A, "READ PAST BEGINNING OF MEDIUM"},
{0x3B, 0x0B, "POSITION PAST END OF MEDIUM"},
{0x3B, 0x0C, "POSITION PAST BEGINNING OF MEDIUM"},
{0x3B, 0x0D, "MEDIUM DESTINATION ELEMENT FULL"},
{0x3B, 0x0E, "MEDIUM SOURCE ELEMENT EMPTY"},
{0x3D, 0x00, "INVALID BITS IN IDENTIFY MESSAGE"},
{0x3E, 0x00, "LOGICAL UNIT HAS NOT SELF-CONFIGURED YET"},
{0x3F, 0x00, "TARGET OPERATING CONDITIONS HAVE CHANGED"},
{0x3F, 0x01, "MICROCODE HAS BEEN CHANGED"},
{0x3F, 0x02, "LPWRSOMC CHANGED OPERATING DEFINITION"},
{0x3F, 0x03, "INQUIRY DATA HAS CHANGED"},
{0x40, 0x00, "RAM FAILURE (SHOULD USE 40 NN)"},
{0x41, 0x00, "DATA PATH FAILURE (SHOULD USE 40 NN)"},
{0x42, 0x00, "POWER-ON OR SELF-TEST FAILURE (SHOULD USE 40 NN)"},
{0x43, 0x00, "MESSAGE ERROR"},
{0x44, 0x00, "INTERNAL TARGET FAILURE"},
{0x45, 0x00, "SELECT OR RESELECT FAILURE"},
{0x46, 0x00, "UNSUCCESSFUL SOFT RESET"},
{0x47, 0x00, "SCSI PARITY ERROR"},
{0x48, 0x00, "INITIATOR DETECTED ERROR MESSAGE RECEIVED"},
{0x49, 0x00, "INVALID MESSAGE ERROR"},
{0x4A, 0x00, "COMMAND PHASE ERROR"},
{0x4B, 0x00, "DATA PHASE ERROR"},
{0x4C, 0x00, "LOGICAL UNIT FAILED SELF-CONFIGURATION"},
{0x4E, 0x00, "OVERLAPPED COMMANDS ATTEMPTED"},
{0x50, 0x00, "WRITE APPEND ERROR"},
{0x50, 0x01, "WRITE APPEND POSITION ERROR"},
{0x50, 0x02, "POSITION ERROR RELATED TO TIMING"},
{0x51, 0x00, "ERASE FAILURE"},
{0x52, 0x00, "CARTRIDGE FAULT"},
{0x53, 0x00, "MEDIA LOAD OR EJECT FAILED"},
{0x53, 0x01, "UNLOAD TAPE FAILURE"},
{0x53, 0x02, "MEDIUM REMOVAL PREVENTED"},
{0x54, 0x00, "SCSI TO HOST SYSTEM INTERFACE FAILURE"},
{0x55, 0x00, "SYSTEM RESOURCE FAILURE"},
{0x57, 0x00, "UNABLE TO RECOVER TABLE-OF-CONTENTS"},
{0x58, 0x00, "GENERATION DOES NOT EXIST"},
{0x59, 0x00, "UPDATED BLOCK READ"},
{0x5A, 0x00, "OPERATOR REQUEST OR STATE CHANGE INPUT (UNSPECIFIED)"},
{0x5A, 0x01, "OPERATOR MEDIUM REMOVAL REQUEST"},
{0x5A, 0x02, "OPERATOR SELECTED WRITE PROTECT"},
{0x5A, 0x03, "OPERATOR SELECTED WRITE PERMIT"},
{0x5B, 0x00, "LOG EXCEPTION"},
{0x5B, 0x01, "THRESHOLD CONDITION MET"},
{0x5B, 0x02, "LOG COUNTER AT MAXIMUM"},
{0x5B, 0x03, "LOG LIST CODES EXHAUSTED"},
{0x5C, 0x00, "RPL STATUS CHANGE"},
{0x5C, 0x01, "SPINDLES SYNCHRONIZED"},
{0x5C, 0x02, "SPINDLES NOT SYNCHRONIZED"},
{0x60, 0x00, "LAMP FAILURE"},
{0x61, 0x00, "VIDEO ACQUISITION ERROR"},
{0x61, 0x01, "UNABLE TO ACQUIRE VIDEO"},
{0x61, 0x02, "OUT OF FOCUS"},
{0x62, 0x00, "SCAN HEAD POSITIONING ERROR"},
{0x63, 0x00, "END OF USER AREA ENCOUNTERED ON THIS TRACK"},
{0x64, 0x00, "ILLEGAL MODE FOR THIS TRACK"},
{0x00, 0x00, NULL}
};
/*
* get_sessid:
* Get session ID. Queries Daemon for numeric ID if the user specifies
* a symbolic session name.
*
* Parameter: argc, argv (shifted)
*
* Returns: session ID if OK - else it doesn't return at all.
*/
uint32_t
get_sessid(int argc, char **argv, int optional)
{
iscsid_sym_id_t sid;
iscsid_search_list_req_t srch;
iscsid_response_t *rsp;
if (!cl_get_id('I', &sid, argc, argv)) {
if (!optional) {
arg_missing("Session ID");
}
return 0;
}
if (!sid.id) {
srch.list_kind = SESSION_LIST;
srch.search_kind = FIND_NAME;
strlcpy((char *)srch.strval, (char *)sid.name, sizeof(srch.strval));
srch.intval = 0;
send_request(ISCSID_SEARCH_LIST, sizeof(srch), &srch);
rsp = get_response(FALSE);
if (rsp->status)
status_error_slist(rsp->status);
GET_SYM_ID(sid.id, rsp->parameter);
free_response(rsp);
}
return sid.id;
}
/*
* dump_data:
* Displays the returned data in hex and ASCII format.
*
* Parameter:
* title Title text for Dump.
* buf Buffer to dump.
* len Number of bytes in buffer.
*/
void
dump_data(const char *title, const void *buffer, size_t len)
{
const uint8_t *bp = buffer;
size_t i, nelem;
printf("%s\n", title);
while (len > 0) {
nelem = min(16, len);
printf(" ");
for (i = 0; i < nelem; i++) {
if (i >= len)
printf(" ");
else
printf("%02x ", bp[i]);
}
for (i = nelem; i < 16; i++) {
printf(" ");
}
printf(" '");
for (i = 0; i < nelem; i++) {
if (i >= len)
break;
printf("%c", isprint(bp[i]) ? bp[i] : ' ');
}
printf("'\n");
if (len < 16)
break;
len -= 16;
bp += 16;
}
}
/*
* add_asc_info:
* Examines additional sense code and qualifier, adds text to given string
* if it's in the table.
*
* Parameter:
* str The existing sense code string
* asc Additional sense code
* ascq Additional sense code qualifier
*
* Returns: the result string.
*/
STATIC char *
add_asc_info(char *str, uint8_t asc, uint8_t ascq)
{
asc_tab_t *pt;
char *bp;
for (pt = asctab; pt->key != NULL && asc >= pt->asc; pt++) {
if (asc == pt->asc && ascq == pt->ascq) {
bp = (char *)&buf[1024];
snprintf(bp, sizeof(buf) - 1024, "%s: %s",
str, pt->key);
return bp;
}
}
return str;
}
/*
* do_ioctl:
* Executes the I/O command, evaluates the return code, and displays
* sense data if the command failed.
*
* Parameter:
* io The i/o command parameters.
*
* Returns: 0 if OK, else an error code.
*/
int
do_ioctl(iscsi_iocommand_parameters_t * io, int rd)
{
char *esp;
char es[64];
int rc;
io->req.databuf = buf;
io->req.senselen = sizeof(io->req.sense);
io->req.senselen_used = 0;
io->req.flags = (rd) ? SCCMD_READ : SCCMD_WRITE;
rc = ioctl(driver, ISCSI_IO_COMMAND, io);
if (io->req.senselen_used) {
switch (io->req.sense[2] & 0x0f) {
case 0x01:
snprintf(esp = es, sizeof(es), "Recovered Error");
break;
case 0x02:
snprintf(esp = es, sizeof(es), "Not Ready");
break;
case 0x03:
snprintf(esp = es, sizeof(es), "Medium Error");
break;
case 0x04:
snprintf(esp = es, sizeof(es), "Hardware Error");
break;
case 0x05:
snprintf(esp = es, sizeof(es), "Illegal Request");
break;
case 0x06:
snprintf(esp = es, sizeof(es), "Unit Attention");
break;
case 0x07:
snprintf(esp = es, sizeof(es), "Data Protect");
break;
case 0x08:
snprintf(esp = es, sizeof(es), "Blank Check");
break;
default:
snprintf(esp = (char *)&buf[256], sizeof(buf) - 256, "Sense key 0x%x",
io->req.sense[2] & 0x0f);
break;
}
if (io->req.senselen_used >= 14) {
add_asc_info(esp, io->req.sense[12], io->req.sense[13]);
}
snprintf((char *)buf, sizeof(buf), "Sense Data (%s):", esp);
dump_data((char *)buf, io->req.sense, io->req.senselen_used);
return io->req.retsts;
}
if (io->status) {
status_error(io->status);
}
if (rc) {
io_error("I/O command");
}
return 0;
}
/*
* inquiry:
* Handle the inquiry command.
*
* Parameter: argc, argv (shifted)
*
* Returns: 0 if OK - else it doesn't return at all.
*/
int
inquiry(int argc, char **argv)
{
iscsi_iocommand_parameters_t io;
char opt;
int pag, rc;
(void) memset(&io, 0x0, sizeof(io));
if ((io.session_id = get_sessid(argc, argv, FALSE)) == 0) {
return 1;
}
io.lun = cl_get_longlong('l', argc, argv);
opt = cl_get_char('d', argc, argv);
switch (opt) {
case 0:
case '0':
opt = 0;
break;
case 'p':
case 'P':
io.req.cmd[1] = 0x01;
opt = 1;
break;
case 'c':
case 'C':
io.req.cmd[1] = 0x02;
opt = 2;
break;
default:
gen_error("Invalid detail option '%c'\n", opt);
}
pag = cl_get_int('p', argc, argv);
check_extra_args(argc, argv);
io.req.cmdlen = 6;
io.req.cmd[0] = 0x12;
io.req.cmd[2] = (uint8_t) pag;
io.req.cmd[4] = 0xff;
io.req.datalen = 0xff;
if ((rc = do_ioctl(&io, TRUE)) != 0) {
return rc;
}
if (!io.req.datalen_used) {
printf("No Data!\n");
return 1;
}
dump_data("Inquiry Data:", buf, io.req.datalen_used);
return 0;
}
/*
* read_capacity:
* Handle the read_capacity command.
*
* Parameter: argc, argv (shifted)
*
* Returns: 0 if OK - else it doesn't return at all.
*/
int
read_capacity(int argc, char **argv)
{
iscsi_iocommand_parameters_t io;
int rc;
uint32_t bsz;
uint64_t lbn, cap;
uint32_t n;
(void) memset(&io, 0x0, sizeof(io));
if ((io.session_id = get_sessid(argc, argv, FALSE)) == 0) {
return 1;
}
io.lun = cl_get_longlong('l', argc, argv);
check_extra_args(argc, argv);
io.req.cmdlen = 10;
io.req.cmd[0] = 0x25;
io.req.datalen = 8;
if ((rc = do_ioctl(&io, TRUE)) != 0) {
return rc;
}
(void) memcpy(&n, buf, sizeof(n));
lbn = (uint64_t)(n + 1);
(void) memcpy(&n, &buf[4], sizeof(n));
bsz = ntohl(n);
cap = lbn * bsz;
printf("Total Blocks: %" PRIu64 ", Block Size: %u, Capacity: %" PRIu64 " Bytes\n",
lbn, bsz, cap);
return 0;
}
/*
* test_unit_ready:
* Handle the test_unit_ready command.
*
* Parameter: argc, argv (shifted)
*
* Returns: 0 if OK - else it doesn't return at all.
*/
int
test_unit_ready(int argc, char **argv)
{
iscsi_iocommand_parameters_t io;
int rc;
(void) memset(&io, 0x0, sizeof(io));
if ((io.session_id = get_sessid(argc, argv, FALSE)) == 0) {
return 1;
}
io.lun = cl_get_longlong('l', argc, argv);
check_extra_args(argc, argv);
io.req.cmdlen = 6;
io.req.cmd[0] = 0x00;
io.req.datalen = 0;
if ((rc = do_ioctl(&io, TRUE)) != 0) {
return rc;
}
printf("Unit is ready\n");
return 0;
}
/*
* report_luns:
* Handle the report_luns command.
*
* Parameter: argc, argv (shifted)
*
* Returns: 0 if OK - else it doesn't return at all.
*/
int
report_luns(int argc, char **argv)
{
iscsi_iocommand_parameters_t io;
int rc;
size_t llen;
uint32_t n;
uint64_t *lp;
(void) memset(&io, 0x0, sizeof(io));
if ((io.session_id = get_sessid(argc, argv, FALSE)) == 0) {
return 1;
}
check_extra_args(argc, argv);
io.req.cmdlen = 12;
io.req.cmd[0] = 0xa0;
n = htonl(sizeof(buf));
(void) memcpy(&io.req.cmd[6], &n, sizeof(n));
io.req.datalen = sizeof(buf);
if ((rc = do_ioctl(&io, TRUE)) != 0) {
return rc;
}
(void) memcpy(&n, buf, sizeof(n));
llen = ntohl(n);
if (!llen) {
printf("No LUNs!\n");
return 1;
}
if (llen + 8 > sizeof(buf))
printf("Partial ");
printf("LUN List:\n");
lp = (uint64_t *)(void *) &buf[8];
for (llen = min(llen, sizeof(buf) - 8) / 8; llen; llen--) {
printf(" 0x%" PRIx64 "\n", ntohq(*lp));
lp++;
}
return 0;
}