/*
* Copyright 1999 through 2004 by Marc Aurele La France (TSI @ UQV), tsi@xfree86.org
*
* Permission to use, copy, modify, distribute, and sell this software and its
* documentation for any purpose is hereby granted without fee, provided that
* the above copyright notice appear in all copies and that both that copyright
* notice and this permission notice appear in supporting documentation, and
* that the name of Marc Aurele La France not be used in advertising or
* publicity pertaining to distribution of the software without specific,
* written prior permission. Marc Aurele La France makes no representations
* about the suitability of this software for any purpose. It is provided
* "as-is" without express or implied warranty.
*
* MARC AURELE LA FRANCE DISCLAIMS ALL WARRANTIES WITH REGARD TO THIS SOFTWARE,
* INCLUDING ALL IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS. IN NO
* EVENT SHALL MARC AURELE LA FRANCE BE LIABLE FOR ANY SPECIAL, INDIRECT OR
* CONSEQUENTIAL DAMAGES OR ANY DAMAGES WHATSOEVER RESULTING FROM LOSS OF USE,
* DATA OR PROFITS, WHETHER IN AN ACTION OF CONTRACT, NEGLIGENCE OR OTHER
* TORTIOUS ACTION, ARISING OUT OF OR IN CONNECTION WITH THE USE OR
* PERFORMANCE OF THIS SOFTWARE.
*/
#ifdef HAVE_CONFIG_H
#include "config.h"
#endif
#include <string.h>
#include <stdio.h>
#ifdef __NetBSD__
#include <sys/time.h>
#include <sys/ioctl.h>
#include <errno.h>
#include <dev/wscons/wsconsio.h>
#endif
#include "ati.h"
#include "atiaudio.h"
#include "atibus.h"
#include "atichip.h"
#include "aticursor.h"
#include "atidac.h"
#include "atidsp.h"
#include "atii2c.h"
#include "atiload.h"
#include "atilock.h"
#include "atimach64.h"
#include "atimach64accel.h"
#include "atimach64io.h"
#include "atimach64probe.h"
#include "atimode.h"
#include "atioption.h"
#include "atipreinit.h"
#include "atiprint.h"
#include "atiprobe.h"
#include "atividmem.h"
#include "atiwonderio.h"
#include "atixv.h"
#include "atiadjust.h"
#include "vbe.h"
#if GET_ABI_MAJOR(ABI_VIDEODRV_VERSION) < 6
#include "xf86RAC.h"
#endif
#include "xf86Priv.h"
#include "xf86Privstr.h"
/*
* FreeScreen handles the clean-up.
*/
static Bool
Mach64GetRec(ScrnInfoPtr pScrn)
{
if (!pScrn->driverPrivate) {
pScrn->driverPrivate = xnfcalloc(sizeof(ATIRec), 1);
memset(pScrn->driverPrivate, 0, sizeof(ATIRec));
}
return TRUE;
}
/*
* ATIReportMemory --
*
* This function reports on the amount and type of video memory found.
*/
static void
ATIReportMemory
(
ScrnInfoPtr pScreenInfo,
ATIPtr pATI,
const char *MemoryTypeName
)
{
char Buffer[128], *Message;
Message = Buffer +
snprintf(Buffer, SizeOf(Buffer), "%d kB of %s detected",
pATI->VideoRAM, MemoryTypeName);
if (pATI->VideoRAM > pScreenInfo->videoRam)
{
Message += snprintf(Message, Buffer + SizeOf(Buffer) - Message,
" (using %d kB)", pScreenInfo->videoRam);
}
xf86DrvMsg(pScreenInfo->scrnIndex, X_PROBED, "%s.\n", Buffer);
}
static const int videoRamSizes[] =
{512, 1024, 2*1024, 4*1024, 6*1024, 8*1024, 12*1024, 16*1024};
static const rgb defaultWeight = {0, 0, 0};
static const Gamma defaultGamma = {0.0, 0.0, 0.0};
/*
* ATIPrintNoiseIfRequested --
*
* This function formats debugging information on the server's stderr when
* requested by the user through the server's verbosity setting.
*/
static void
ATIPrintNoiseIfRequested
(
ATIPtr pATI,
CARD8 *BIOS,
unsigned int BIOSSize
)
{
if (xf86GetVerbosity() <= 3)
return;
if (BIOSSize > 0)
ATIPrintBIOS(BIOS, BIOSSize);
xf86ErrorFVerb(4, "\n On server entry:\n");
ATIPrintRegisters(pATI);
}
#define BIOS_SIZE 0x00010000U /* 64kB */
#define BIOSByte(_n) ((CARD8)(BIOS[_n]))
#define BIOSWord(_n) ((CARD16)(BIOS[_n] | \
(BIOS[(_n) + 1] << 8)))
/*
* For Mach64 adapters, pick up, from the BIOS, the type of programmable
* clock generator (if any), and various information about it.
*/
static void
ati_bios_clock
(
ScrnInfoPtr pScreenInfo,
ATIPtr pATI,
CARD8 *BIOS,
unsigned int ClockTable,
GDevPtr pGDev
)
{
CARD16 ClockDac;
if (ClockTable > 0)
{
pATI->ProgrammableClock = BIOSByte(ClockTable);
pATI->ClockNumberToProgramme = BIOSByte(ClockTable + 0x06U);
pATI->refclk = BIOSWord(ClockTable + 0x08U);
pATI->refclk *= 10000;
}
else
{
/*
* Compensate for BIOS absence. Note that the reference
* frequency has already been set by option processing.
*/
if ((pATI->DAC & ~0x0FU) == ATI_DAC_INTERNAL)
{
pATI->ProgrammableClock = ATI_CLOCK_INTERNAL;
}
else switch (pATI->DAC)
{
case ATI_DAC_STG1703:
pATI->ProgrammableClock = ATI_CLOCK_STG1703;
break;
case ATI_DAC_CH8398:
pATI->ProgrammableClock = ATI_CLOCK_CH8398;
break;
case ATI_DAC_ATT20C408:
pATI->ProgrammableClock = ATI_CLOCK_ATT20C408;
break;
case ATI_DAC_IBMRGB514:
pATI->ProgrammableClock = ATI_CLOCK_IBMRGB514;
break;
default: /* Provisional */
pATI->ProgrammableClock = ATI_CLOCK_ICS2595;
break;
}
/* This should be safe for all generators except IBM's RGB514 */
pATI->ClockNumberToProgramme = 3;
}
pATI->ClockDescriptor = ATIClockDescriptors[ATI_CLOCK_FIXED];
if ((pATI->ProgrammableClock > ATI_CLOCK_FIXED) &&
(pATI->ProgrammableClock < ATI_CLOCK_MAX))
{
/*
* Graphics PRO TURBO 1600's are unusual in that an ICS2595 is used
* to generate clocks for VGA modes, and an IBM RGB514 is used for
* accelerator modes.
*/
if ((pATI->ProgrammableClock == ATI_CLOCK_ICS2595) &&
(pATI->DAC == ATI_DAC_IBMRGB514))
pATI->ProgrammableClock = ATI_CLOCK_IBMRGB514;
pATI->ClockDescriptor = ATIClockDescriptors[pATI->ProgrammableClock];
}
ClockDac = pATI->DAC;
switch (pATI->ProgrammableClock)
{
case ATI_CLOCK_ICS2595:
/*
* Pick up reference divider (43 or 46) appropriate to the chip
* revision level.
*/
if (ClockTable > 0)
pATI->ClockDescriptor.MinM =
pATI->ClockDescriptor.MaxM = BIOSWord(ClockTable + 0x0AU);
else if (!xf86NameCmp(pGDev->clockchip, "ATI 18818-0"))
pATI->ClockDescriptor.MinM =
pATI->ClockDescriptor.MaxM = 43;
else if (!xf86NameCmp(pGDev->clockchip, "ATI 18818-1"))
pATI->ClockDescriptor.MinM =
pATI->ClockDescriptor.MaxM = 46;
else
pATI->ProgrammableClock = ATI_CLOCK_UNKNOWN;
break;
case ATI_CLOCK_STG1703:
/* This one's also a RAMDAC */
ClockDac = ATI_DAC_STG1703;
break;
case ATI_CLOCK_CH8398:
/* This one's also a RAMDAC */
ClockDac = ATI_DAC_CH8398;
break;
case ATI_CLOCK_INTERNAL:
/*
* The reference divider has already been programmed by BIOS
* initialisation. Because, there is only one reference
* divider for all generated frequencies (including MCLK), it
* cannot be changed without reprogramming all clocks every
* time one of them needs a different reference divider.
*
* Besides, it's not a good idea to change the reference
* divider. BIOS initialisation sets it to a value that
* effectively prevents generating frequencies beyond the
* graphics controller's tolerance.
*/
pATI->ClockDescriptor.MinM =
pATI->ClockDescriptor.MaxM = ATIMach64GetPLLReg(PLL_REF_DIV);
/* The DAC is also integrated */
if ((pATI->DAC & ~0x0FU) != ATI_DAC_INTERNAL)
ClockDac = ATI_DAC_INTERNAL;
break;
case ATI_CLOCK_ATT20C408:
/* This one's also a RAMDAC */
ClockDac = ATI_DAC_ATT20C408;
break;
case ATI_CLOCK_IBMRGB514:
/* This one's also a RAMDAC */
ClockDac = ATI_DAC_IBMRGB514;
pATI->ClockNumberToProgramme = 7;
break;
default:
break;
}
/*
* We now have up to two indications of what RAMDAC the adapter uses.
* They should be the same. The following test and corresponding
* action are under construction.
*/
if (pATI->DAC != ClockDac)
{
xf86DrvMsg(pScreenInfo->scrnIndex, X_WARNING,
"Mach64 RAMDAC probe discrepancy detected:\n"
" DAC=0x%02X; ClockDac=0x%02X.\n",
pATI->DAC, ClockDac);
if (pATI->DAC == ATI_DAC_IBMRGB514)
{
pATI->ProgrammableClock = ATI_CLOCK_IBMRGB514;
pATI->ClockDescriptor = ATIClockDescriptors[ATI_CLOCK_IBMRGB514];
pATI->ClockNumberToProgramme = 7;
}
else
{
pATI->DAC = ClockDac; /* For now */
}
}
switch (pATI->refclk / 100000)
{
case 143:
pATI->ReferenceNumerator = 157500;
pATI->ReferenceDenominator = 11;
break;
case 286:
pATI->ReferenceNumerator = 315000;
pATI->ReferenceDenominator = 11;
break;
default:
pATI->ReferenceNumerator = pATI->refclk / 1000;
pATI->ReferenceDenominator = 1;
break;
}
}
/*
* Pick up multimedia information, which will be at different
* displacements depending on table revision.
*/
static void
ati_bios_mmedia
(
ScrnInfoPtr pScreenInfo,
ATIPtr pATI,
CARD8 *BIOS,
unsigned int VideoTable,
unsigned int HardwareTable
)
{
pATI->Audio = ATI_AUDIO_NONE;
if (VideoTable > 0)
{
switch (BIOSByte(VideoTable - 0x02U))
{
case 0x00U:
pATI->Tuner = BIOSByte(VideoTable) & 0x1FU;
/*
* XXX The VideoTable[1] byte is known to have been
* omitted in LTPro and Mobility BIOS'es. Any others?
*/
switch (pATI->Chip)
{
case ATI_CHIP_264LTPRO:
case ATI_CHIP_MOBILITY:
pATI->Decoder = BIOSByte(VideoTable + 0x01U) & 0x07U;
pATI->Audio = BIOSByte(VideoTable + 0x02U) & 0x0FU;
break;
default:
pATI->Decoder = BIOSByte(VideoTable + 0x02U) & 0x07U;
pATI->Audio = BIOSByte(VideoTable + 0x03U) & 0x0FU;
break;
}
break;
case 0x01U:
pATI->Tuner = BIOSByte(VideoTable) & 0x1FU;
pATI->Audio = BIOSByte(VideoTable + 0x01U) & 0x0FU;
pATI->Decoder = BIOSByte(VideoTable + 0x05U) & 0x0FU;
break;
default:
break;
}
}
if (HardwareTable > 0)
{
pATI->I2CType = BIOSByte(HardwareTable + 0x06U) & 0x0FU;
}
}
/*
* Determine panel dimensions and model.
*/
static void
ati_bios_panel_info
(
ScrnInfoPtr pScreenInfo,
ATIPtr pATI,
CARD8 *BIOS,
unsigned int BIOSSize,
unsigned int LCDTable
)
{
unsigned int LCDPanelInfo = 0;
char Buffer[128];
int i, j;
if (LCDTable > 0)
{
LCDPanelInfo = BIOSWord(LCDTable + 0x0AU);
if (((LCDPanelInfo + 0x1DU) > BIOSSize) ||
((BIOSByte(LCDPanelInfo) != pATI->LCDPanelID) &&
(pATI->LCDPanelID || (BIOSByte(LCDPanelInfo) > 0x1FU) ||
(pATI->Chip <= ATI_CHIP_264LTPRO))))
LCDPanelInfo = 0;
}
if (!LCDPanelInfo)
{
/*
* Scan BIOS for panel info table.
*/
for (i = 0; i <= (int)(BIOSSize - 0x1DU); i++)
{
/* Look for panel ID ... */
if ((BIOSByte(i) != pATI->LCDPanelID) &&
(pATI->LCDPanelID || (BIOSByte(i) > 0x1FU) ||
(pATI->Chip <= ATI_CHIP_264LTPRO)))
continue;
/* ... followed by 24-byte panel model name ... */
for (j = 0; j < 24; j++)
{
if ((CARD8)(BIOSByte(i + j + 1) - 0x20U) > 0x5FU)
{
i += j;
goto NextBIOSByte;
}
}
/* ... verify panel width ... */
if (pATI->LCDHorizontal &&
(pATI->LCDHorizontal != BIOSWord(i + 0x19U)))
continue;
/* ... and verify panel height */
if (pATI->LCDVertical &&
(pATI->LCDVertical != BIOSWord(i + 0x1BU)))
continue;
if (LCDPanelInfo)
{
/*
* More than one possibility, but don't care if all
* tables describe panels of the same size.
*/
if ((BIOSByte(LCDPanelInfo + 0x19U) ==
BIOSByte(i + 0x19U)) &&
(BIOSByte(LCDPanelInfo + 0x1AU) ==
BIOSByte(i + 0x1AU)) &&
(BIOSByte(LCDPanelInfo + 0x1BU) ==
BIOSByte(i + 0x1BU)) &&
(BIOSByte(LCDPanelInfo + 0x1CU) ==
BIOSByte(i + 0x1CU)))
continue;
LCDPanelInfo = 0;
break;
}
LCDPanelInfo = i;
NextBIOSByte: ;
}
}
if (LCDPanelInfo > 0)
{
pATI->LCDPanelID = BIOSByte(LCDPanelInfo);
pATI->LCDHorizontal = BIOSWord(LCDPanelInfo + 0x19U);
pATI->LCDVertical = BIOSWord(LCDPanelInfo + 0x1BU);
}
if (LCDPanelInfo)
{
for (i = 0; i < 24; i++)
Buffer[i] = BIOSByte(LCDPanelInfo + 1 + i);
for (; --i >= 0; )
if (Buffer[i] && Buffer[i] != ' ')
{
Buffer[i + 1] = '\0';
xf86DrvMsg(pScreenInfo->scrnIndex, X_PROBED,
"Panel model %s.\n", Buffer);
break;
}
}
}
/*
* ATIPreInit --
*
* This function is only called once per screen at the start of the first
* server generation.
*/
Bool
ATIPreInit
(
ScrnInfoPtr pScreenInfo,
int flags
)
{
CARD8 BIOS[BIOS_SIZE];
unsigned int BIOSSize = 0;
unsigned int ROMTable = 0, ClockTable = 0, FrequencyTable = 0;
unsigned int LCDTable = 0, VideoTable = 0;
unsigned int HardwareTable = 0;
char Buffer[128], *Message;
ATIPtr pATI;
GDevPtr pGDev;
EntityInfoPtr pEntity;
#ifndef XSERVER_LIBPCIACCESS
resPtr pResources;
#endif
pciVideoPtr pVideo;
DisplayModePtr pMode;
CARD32 IOValue;
int i, j;
int Numerator, Denominator;
int MinX, MinY;
ClockRange ATIClockRange = {NULL, 0, 80000, -1, TRUE, TRUE, 1, 1, 0};
int DefaultmaxClock = 0;
int minPitch, maxPitch = 0xFFU, pitchInc, maxHeight = 0;
int ApertureSize = 0x00010000U;
int ModeType = M_T_BUILTIN;
LookupModeFlags Strategy = LOOKUP_CLOSEST_CLOCK;
int DefaultDepth;
Bool PreInitSuccess = FALSE;
# define pATIHW (&pATI->OldHW)
#ifndef AVOID_CPIO_
vbeInfoPtr pVBE = NULL;
pointer pVBEModule = NULL;
#endif /* AVOID_CPIO */
if (pScreenInfo->numEntities != 1)
{
xf86DrvMsg(pScreenInfo->scrnIndex, X_ERROR,
"Logic error: Number of attached entities not 1.\n");
return FALSE;
}
if (!Mach64GetRec(pScreenInfo))
return FALSE;
pATI = ATIPTR(pScreenInfo);
/* Register resources */
pEntity = xf86GetEntityInfo(pScreenInfo->entityList[0]);
pGDev = pEntity->device;
#ifndef XSERVER_LIBPCIACCESS
pResources = pEntity->resources;
#endif
pATI->iEntity = pEntity->index;
pATI->Chip = pEntity->chipset;
pVideo = xf86GetPciInfoForEntity(pATI->iEntity);
free(pEntity);
#ifndef XSERVER_LIBPCIACCESS
if (!pResources)
pResources = xf86RegisterResources(pATI->iEntity, NULL, ResShared);
if (pResources)
{
xf86DrvMsg(pScreenInfo->scrnIndex, X_ERROR,
"Unable to register bus resources\n");
xf86FreeResList(pResources);
return FALSE;
}
#endif
ConfiguredMonitor = NULL;
(void)memset(BIOS, 0, SizeOf(BIOS));
if (!(flags & PROBE_DETECT))
{
/* Set monitor */
pScreenInfo->monitor = pScreenInfo->confScreen->monitor;
/* Set depth, bpp, etc. */
if ((pATI->Chip < ATI_CHIP_264CT))
{
i = NoDepth24Support; /* No support for >8bpp either */
DefaultDepth = 8;
}
else
{
i = Support24bppFb | Support32bppFb;
DefaultDepth = 0;
}
if (!xf86SetDepthBpp(pScreenInfo, DefaultDepth, 0, 0, i))
return FALSE;
for (j = 0; ; j++)
{
static const CARD8 AllowedDepthBpp[][2] =
{
{ 8, 8},
{15, 16},
{16, 16},
{24, 24},
{24, 32}
};
if (j < NumberOf(AllowedDepthBpp))
{
if (pScreenInfo->depth > AllowedDepthBpp[j][0])
continue;
if (pScreenInfo->depth == AllowedDepthBpp[j][0])
{
if (pScreenInfo->bitsPerPixel > AllowedDepthBpp[j][1])
continue;
if (pScreenInfo->bitsPerPixel == AllowedDepthBpp[j][1])
break;
}
}
xf86DrvMsg(pScreenInfo->scrnIndex, X_ERROR,
"Driver does not support depth %d at fbbpp %d.\n",
pScreenInfo->depth, pScreenInfo->bitsPerPixel);
return FALSE;
}
xf86PrintDepthBpp(pScreenInfo);
if ((i == NoDepth24Support) && (pScreenInfo->depth > 8))
{
xf86DrvMsg(pScreenInfo->scrnIndex, X_ERROR,
"Depth %d is not supported through this adapter.\n",
pScreenInfo->depth);
return FALSE;
}
/* Pick up XF86Config options */
ATIProcessOptions(pScreenInfo, pATI);
}
if (!ATIMach64ProbeIO(pVideo, pATI))
return FALSE;
ATIClaimBusSlot(pGDev->active, pATI);
#ifndef AVOID_CPIO
#ifdef TV_OUT
pATI->pVBE = NULL;
pATI->pInt10 = NULL;
#endif /* TV_OUT */
/*
* If VBE setup works, grab DDC from it
*/
if (!(pVBEModule = xf86LoadSubModule(pScreenInfo, "vbe"))) {
xf86DrvMsg(pScreenInfo->scrnIndex, X_WARNING,
"Unable to load vbe module.\n");
}
else
{
if ((pVBE = VBEInit(NULL, pATI->iEntity)))
ConfiguredMonitor = vbeDoEDID(pVBE, NULL);
if (pVBE && !(flags & PROBE_DETECT))
{
xf86Int10InfoPtr pInt10Info = pVBE->pInt10;
/* Validate, then make a private copy of, the initialised BIOS */
CARD8 *pBIOS = xf86int10Addr(pInt10Info, pInt10Info->BIOSseg << 4);
if ((pBIOS[0] != 0x55U) || (pBIOS[1] != 0xAAU) || !pBIOS[2])
{
xf86DrvMsg(pScreenInfo->scrnIndex, X_WARNING,
"Unable to correctly retrieve adapter BIOS.\n");
}
else
{
BIOSSize = pBIOS[2] << 9;
if (BIOSSize > BIOS_SIZE)
BIOSSize = BIOS_SIZE;
(void)memcpy(BIOS, pBIOS, BIOSSize);
}
}
}
#ifndef TV_OUT
/* De-activate VBE */
vbeFree(pVBE);
xf86UnloadSubModule(pVBEModule);
#else
pATI->pVBE = pVBE;
pVBE = NULL;
#endif /* TV_OUT */
#endif /* AVOID_CPIO */
#ifdef __NetBSD__
if (ConfiguredMonitor == NULL) {
struct wsdisplayio_edid_info ei;
char buffer[1024];
int i, j;
ei.edid_data = buffer;
ei.buffer_size = 1024;
if (ioctl(xf86Info.consoleFd, WSDISPLAYIO_GET_EDID, &ei) != -1) {
xf86Msg(X_INFO, "got %d bytes worth of EDID from wsdisplay\n", ei.data_size);
ConfiguredMonitor = xf86InterpretEDID(pScreenInfo->scrnIndex, buffer);
} else
xf86Msg(X_INFO, "ioctl failed %d\n", errno);
}
#endif
if (ConfiguredMonitor && !(flags & PROBE_DETECT))
{
xf86PrintEDID(ConfiguredMonitor);
xf86SetDDCproperties(pScreenInfo, ConfiguredMonitor);
}
if (flags & PROBE_DETECT)
{
return TRUE;
}
#ifndef AVOID_CPIO
/* I/O bases might no longer be valid after BIOS initialisation */
{
if (pATI->CPIODecoding == BLOCK_IO)
pATI->CPIOBase = PCI_REGION_BASE(pVideo, 1, REGION_IO);
pATI->MMIOInLinear = FALSE;
/* Set MMIO address from PCI configuration space, if available */
if ((pATI->Block0Base = PCI_REGION_BASE(pVideo, 2, REGION_MEM)))
{
pATI->Block0Base += 0x0400U;
}
}
#endif /* AVOID_CPIO */
#ifndef XSERVER_LIBPCIACCESS
#ifdef AVOID_CPIO
pScreenInfo->racMemFlags =
RAC_FB | RAC_COLORMAP | RAC_VIEWPORT | RAC_CURSOR;
#else /* AVOID_CPIO */
pScreenInfo->racIoFlags =
RAC_FB | RAC_COLORMAP | RAC_VIEWPORT | RAC_CURSOR;
pScreenInfo->racMemFlags = RAC_FB | RAC_CURSOR;
#endif /* AVOID_CPIO */
#endif
/* Finish private area initialisation */
pATI->nFIFOEntries = 16; /* For now */
/* Finish probing the adapter */
{
/*
* For MMIO register access, the MMIO address is computed when probing
* and there are no BIOS calls. This mapping should always succeed.
*
* For CPIO register access, the MMIO address is computed above in the
* presence of an auxiliary aperture. Otherwise, it is set to zero and
* gets computed when we read the linear aperture configuration. This
* mapping is either irrelevant or a no-op.
*/
if (!ATIMapApertures(pScreenInfo->scrnIndex, pATI))
return FALSE;
#ifdef AVOID_CPIO
if (!pATI->pBlock[0])
{
xf86DrvMsg(pScreenInfo->scrnIndex, X_ERROR,
"Unable to mmap() adapter registers.\n");
return FALSE;
}
#endif /* AVOID_CPIO */
/*
* Verify register access by comparing against the CONFIG_CHIP_ID
* value saved by adapter detection.
*/
if (pATI->config_chip_id != inr(CONFIG_CHIP_ID))
{
xf86DrvMsg(pScreenInfo->scrnIndex, X_ERROR,
"Adapter registers not mapped correctly.\n");
ATIUnmapApertures(pScreenInfo->scrnIndex, pATI);
return FALSE;
}
pATIHW->crtc_gen_cntl = inr(CRTC_GEN_CNTL);
if (!(pATIHW->crtc_gen_cntl & CRTC_EN) &&
(pATI->Chip >= ATI_CHIP_264CT))
{
xf86DrvMsg(pScreenInfo->scrnIndex, X_ERROR,
"Adapter has not been initialised.\n");
goto bail_locked;
}
#ifdef AVOID_CPIO
if (!(pATIHW->crtc_gen_cntl & CRTC_EXT_DISP_EN))
{
xf86DrvMsg(pScreenInfo->scrnIndex, X_ERROR,
"Adapters found to be in VGA mode on server entry are not"
" supported by the MMIO-only version of this driver.\n");
goto bail_locked;
}
#endif /* AVOID_CPIO */
pATIHW->mem_cntl = inr(MEM_CNTL);
if (pATI->Chip < ATI_CHIP_264VTB)
{
IOValue = GetBits(pATIHW->mem_cntl, CTL_MEM_SIZE);
pATI->VideoRAM = videoRamSizes[IOValue];
}
else
{
pATI->nFIFOEntries = /* Don't care */
(unsigned int)(-1) >> 1;
IOValue = GetBits(pATIHW->mem_cntl, CTL_MEM_SIZEB);
if (IOValue < 8)
pATI->VideoRAM = (IOValue + 1) * 512;
else if (IOValue < 12)
pATI->VideoRAM = (IOValue - 3) * 1024;
else
pATI->VideoRAM = (IOValue - 7) * 2048;
}
IOValue = inr(CONFIG_STATUS64_0);
if (pATI->Chip >= ATI_CHIP_264CT)
{
pATI->MemoryType = GetBits(IOValue, CFG_MEM_TYPE_T);
}
else
{
pATI->MemoryType = GetBits(IOValue, CFG_MEM_TYPE);
}
pATI->LCDPanelID = -1;
if (pATI->Chip >= ATI_CHIP_264CT)
{
/* Get LCD panel id */
if (pATI->Chip == ATI_CHIP_264LT)
{
pATI->LCDPanelID = GetBits(IOValue, CFG_PANEL_ID);
pATIHW->horz_stretching = inr(HORZ_STRETCHING);
pATIHW->vert_stretching = inr(VERT_STRETCHING);
pATIHW->lcd_gen_ctrl = inr(LCD_GEN_CTRL);
}
else if ((pATI->Chip == ATI_CHIP_264LTPRO) ||
(pATI->Chip == ATI_CHIP_264XL) ||
(pATI->Chip == ATI_CHIP_MOBILITY))
{
pATI->LCDPanelID = GetBits(IOValue, CFG_PANEL_ID);
pATIHW->lcd_index = inr(LCD_INDEX);
pATIHW->horz_stretching =
ATIMach64GetLCDReg(LCD_HORZ_STRETCHING);
pATI->LCDHorizontal =
GetBits(pATIHW->horz_stretching, HORZ_PANEL_SIZE);
if (pATI->LCDHorizontal)
{
if (pATI->LCDHorizontal == MaxBits(HORZ_PANEL_SIZE))
pATI->LCDHorizontal = 0;
else
pATI->LCDHorizontal =
(pATI->LCDHorizontal + 1) << 3;
}
pATIHW->ext_vert_stretch =
ATIMach64GetLCDReg(LCD_EXT_VERT_STRETCH);
pATI->LCDVertical =
GetBits(pATIHW->ext_vert_stretch, VERT_PANEL_SIZE);
if (pATI->LCDVertical)
{
if (pATI->LCDVertical == MaxBits(VERT_PANEL_SIZE))
pATI->LCDVertical = 0;
else
pATI->LCDVertical++;
}
pATIHW->vert_stretching =
ATIMach64GetLCDReg(LCD_VERT_STRETCHING);
pATIHW->lcd_gen_ctrl = ATIMach64GetLCDReg(LCD_GEN_CNTL);
outr(LCD_INDEX, pATIHW->lcd_index);
}
/*
* Don't bother with panel support if it hasn't been previously
* enabled.
*/
if ((pATI->LCDPanelID >= 0) &&
!(pATIHW->horz_stretching & HORZ_STRETCH_EN) &&
!(pATIHW->vert_stretching & VERT_STRETCH_EN) &&
!(pATIHW->lcd_gen_ctrl & LCD_ON))
{
/*
* At this point, if an XL or Mobility BIOS hasn't set
* panel dimensions, then there is no panel. Otherwise,
* keep any panel disabled to allow for modes greater than
* the panel's dimensions.
*/
if ((pATI->Chip >= ATI_CHIP_264XL) &&
(!pATI->LCDHorizontal || !pATI->LCDVertical))
pATI->LCDPanelID = -1;
else
pATI->OptionPanelDisplay = FALSE;
}
}
/* Get DAC type */
pATI->DAC = GetBits(inr(DAC_CNTL), DAC_TYPE);
if (pATI->Chip < ATI_CHIP_264CT)
{
/* Factor in what the BIOS says the DAC is */
pATI->DAC = ATI_DAC(pATI->DAC,
GetBits(inr(SCRATCH_REG1), BIOS_INIT_DAC_SUBTYPE));
}
/*
* RAMDAC types 0 & 1 for Mach64's are different than those for
* Mach32's.
*/
if (pATI->DAC < ATI_DAC_ATI68875)
pATI->DAC += ATI_DAC_INTERNAL;
}
{
ROMTable = BIOSWord(0x48U);
if ((ROMTable < 0x0002U) ||
(BIOSWord(ROMTable - 0x02U) < 0x0012U) ||
((ROMTable + BIOSWord(ROMTable - 0x02U)) > BIOSSize))
ROMTable = 0;
if (ROMTable > 0)
{
ClockTable = BIOSWord(ROMTable + 0x10U);
if ((ClockTable + 0x20U) > BIOSSize)
ClockTable = 0;
if (BIOSWord(ROMTable - 0x02U) >= 0x0048U)
{
VideoTable = BIOSWord(ROMTable + 0x46U);
if ((VideoTable < 0x08U) ||
(BIOSByte(VideoTable - 0x01U) < 0x08U) ||
(BIOSByte(VideoTable - 0x02U) > 0x01U) ||
((VideoTable + BIOSByte(VideoTable - 0x01U)) > BIOSSize))
VideoTable = 0;
}
if (BIOSWord(ROMTable - 0x02U) >= 0x004AU)
{
HardwareTable = BIOSWord(ROMTable + 0x48U);
if (((HardwareTable + 0x08U) > BIOSSize) ||
(memcmp(BIOS + HardwareTable, "$ATI", 4) != 0))
HardwareTable = 0;
}
}
#if defined(__sparc__)
/* make PGX64 work by default */
if (pATI->Chip == ATI_CHIP_264XL)
pATI->refclk = 29498000;
#endif
ati_bios_clock(pScreenInfo, pATI, BIOS, ClockTable, pGDev);
ati_bios_mmedia(pScreenInfo, pATI, BIOS, VideoTable, HardwareTable);
if (pATI->LCDPanelID >= 0)
{
LCDTable = BIOSWord(0x78U);
if ((LCDTable + BIOSByte(LCDTable + 5)) > BIOSSize)
LCDTable = 0;
ati_bios_panel_info(pScreenInfo, pATI, BIOS, BIOSSize, LCDTable);
}
xf86DrvMsgVerb(pScreenInfo->scrnIndex, X_INFO, 3,
"BIOS Data: BIOSSize=0x%04X, ROMTable=0x%04X.\n",
BIOSSize, ROMTable);
xf86DrvMsgVerb(pScreenInfo->scrnIndex, X_INFO, 3,
"BIOS Data: ClockTable=0x%04X, FrequencyTable=0x%04X.\n",
ClockTable, FrequencyTable);
xf86DrvMsgVerb(pScreenInfo->scrnIndex, X_INFO, 3,
"BIOS Data: LCDTable=0x%04X.\n",
LCDTable);
xf86DrvMsgVerb(pScreenInfo->scrnIndex, X_INFO, 3,
"BIOS Data: VideoTable=0x%04X, HardwareTable=0x%04X.\n",
VideoTable, HardwareTable);
xf86DrvMsgVerb(pScreenInfo->scrnIndex, X_INFO, 3,
"BIOS Data: I2CType=0x%02X, Tuner=0x%02X, Decoder=0x%02X,"
" Audio=0x%02X.\n",
pATI->I2CType, pATI->Tuner, pATI->Decoder, pATI->Audio);
}
ATIUnlock(pATI); /* Unlock registers */
/* Report what was found */
xf86DrvMsg(pScreenInfo->scrnIndex, X_PROBED,
"%s graphics controller detected.\n",
xf86TokenToString(Mach64Chipsets, pATI->Chip));
{
Message = Buffer + snprintf(Buffer, SizeOf(Buffer), "Chip type %04X",
pATI->ChipType);
if (!(pATI->ChipType & ~(CHIP_CODE_0 | CHIP_CODE_1)))
Message += snprintf(Message, Buffer + SizeOf(Buffer) - Message,
" (%c%c)",
GetBits(pATI->ChipType, CHIP_CODE_1) + 0x41U,
GetBits(pATI->ChipType, CHIP_CODE_0) + 0x41U);
else if ((pATI->ChipType & 0x4040U) == 0x4040U)
Message += snprintf(Message, Buffer + SizeOf(Buffer) - Message,
" \"%c%c\"",
GetByte(pATI->ChipType, 1), GetByte(pATI->ChipType, 0));
if ((pATI->Chip >= ATI_CHIP_264CT) && (pATI->Chip != ATI_CHIP_Mach64))
Message += snprintf(Message, Buffer + SizeOf(Buffer) - Message,
", version %d, foundry %s",
pATI->ChipVersion, ATIFoundryNames[pATI->ChipFoundry]);
xf86DrvMsg(pScreenInfo->scrnIndex, X_PROBED,
"%s, class %d, revision 0x%02X.\n",
Buffer, pATI->ChipClass, pATI->ChipRevision);
}
{
Message = Buffer + snprintf(Buffer, SizeOf(Buffer),
"%s bus interface detected", ATIBusNames[pATI->BusType]);
#ifndef AVOID_CPIO
{
Message += snprintf(Message, Buffer + SizeOf(Buffer) - Message,
"; %s I/O base is 0x%04lX",
(pATI->CPIODecoding == SPARSE_IO) ? "sparse" : "block",
pATI->CPIOBase);
}
#endif /* AVOID_CPIO */
xf86DrvMsg(pScreenInfo->scrnIndex, X_PROBED, "%s.\n", Buffer);
}
#ifndef XSERVER_LIBPCIACCESS
#ifndef AVOID_CPIO
if (pATI->CPIO_VGAWonder)
xf86DrvMsg(pScreenInfo->scrnIndex, X_PROBED,
"VGA Wonder registers at I/O port 0x%04lX.\n",
pATI->CPIO_VGAWonder);
#endif /* AVOID_CPIO */
#endif
xf86DrvMsg(pScreenInfo->scrnIndex, X_PROBED,
"ATI Mach64 adapter detected.\n");
if (pATI->Chip >= ATI_CHIP_264GT)
xf86DrvMsg(pScreenInfo->scrnIndex, X_NOTICE,
"For information on using the multimedia capabilities\n\tof this"
" adapter, please see http://gatos.sf.net.\n");
if ((pATI->DAC & ~0x0FU) == ATI_DAC_INTERNAL)
{
xf86DrvMsg(pScreenInfo->scrnIndex, X_PROBED,
"Internal RAMDAC (subtype %d) detected.\n", pATI->DAC & 0x0FU);
}
else
{
const SymTabRec *DAC;
for (DAC = ATIDACDescriptors; ; DAC++)
{
if (pATI->DAC == DAC->token)
{
xf86DrvMsg(pScreenInfo->scrnIndex, X_PROBED,
"%s RAMDAC detected.\n", DAC->name);
break;
}
if (pATI->DAC < DAC->token)
{
xf86DrvMsgVerb(pScreenInfo->scrnIndex, X_WARNING, 0,
"Unknown RAMDAC type 0x%02X detected.\n", pATI->DAC);
break;
}
}
}
#ifndef XSERVER_LIBPCIACCESS
if (!xf86LinearVidMem())
{
xf86DrvMsg(pScreenInfo->scrnIndex, X_ERROR,
"A linear aperture is not available.\n");
goto bail;
}
#endif
/*
* Set colour weights.
*/
if (pATI->Chip < ATI_CHIP_264CT)
pScreenInfo->rgbBits = 6;
else
pScreenInfo->rgbBits = 8;
pATI->rgbBits = pScreenInfo->rgbBits;
if (!xf86SetWeight(pScreenInfo, defaultWeight, defaultWeight))
goto bail;
if ((pScreenInfo->depth > 8) &&
((pScreenInfo->weight.red != pScreenInfo->weight.blue) ||
(pScreenInfo->weight.red != (CARD32)(pScreenInfo->depth / 3)) ||
((CARD32)pScreenInfo->depth != (pScreenInfo->weight.red +
pScreenInfo->weight.green +
pScreenInfo->weight.blue))))
{
xf86DrvMsg(pScreenInfo->scrnIndex, X_ERROR,
"Driver does not support weight %d%d%d for depth %d.\n",
(int)pScreenInfo->weight.red, (int)pScreenInfo->weight.green,
(int)pScreenInfo->weight.blue, pScreenInfo->depth);
goto bail;
}
/*
* Set default visual.
*/
if (!xf86SetDefaultVisual(pScreenInfo, -1))
goto bail;
if ((pScreenInfo->depth > 8) &&
(((pScreenInfo->defaultVisual | DynamicClass) != DirectColor) ||
((pScreenInfo->defaultVisual == DirectColor) &&
(pATI->DAC == ATI_DAC_INTERNAL))))
{
xf86DrvMsg(pScreenInfo->scrnIndex, X_ERROR,
"Driver does not support default visual %s for depth %d.\n",
xf86GetVisualName(pScreenInfo->defaultVisual),
pScreenInfo->depth);
goto bail;
}
/*
* Set colour gamma.
*/
if (!xf86SetGamma(pScreenInfo, defaultGamma))
goto bail;
pATI->depth = pScreenInfo->depth;
pATI->bitsPerPixel = pScreenInfo->bitsPerPixel;
pATI->weight = pScreenInfo->weight;
pATI->XModifier = pATI->bitsPerPixel / UnitOf(pATI->bitsPerPixel);
/*
* Determine which CRT controller to use for video modes.
*/
{
pATI->NewHW.crtc = ATI_CRTC_MACH64;
xf86DrvMsg(pScreenInfo->scrnIndex, X_INFO,
"Using Mach64 accelerator CRTC.\n");
#ifndef XSERVER_LIBPCIACCESS
#ifndef AVOID_CPIO
if (pATI->VGAAdapter)
{
/*
* No need for VGA I/O resources during operating state (but they
* are still decoded).
*/
pResources =
xf86SetOperatingState(resVgaIo, pATI->iEntity, ResUnusedOpr);
if (pResources)
{
xf86DrvMsg(pScreenInfo->scrnIndex, X_WARNING,
"Logic error setting operating state for VGA I/O.\n");
xf86FreeResList(pResources);
}
if (pATI->CPIO_VGAWonder)
{
pResources = xf86SetOperatingState(pATI->VGAWonderResources,
pATI->iEntity, ResUnusedOpr);
if (pResources)
{
xf86DrvMsg(pScreenInfo->scrnIndex, X_WARNING,
"Logic error setting operating state for"
" VGAWonder I/O.\n");
xf86FreeResList(pResources);
}
}
}
#endif /* AVOID_CPIO */
#endif
}
/*
* Decide between the CRT and the panel.
*/
if (pATI->LCDPanelID >= 0)
{
if (!pATI->OptionPanelDisplay)
{
xf86DrvMsg(pScreenInfo->scrnIndex, X_CONFIG,
"Using CRT interface and disabling digital flat panel.\n");
}
else
{
unsigned HDisplay, VDisplay;
CARD8 ClockMask, PostMask;
/*
* Determine porch data. This groks the mode on entry to extract
* the width and position of its sync and blanking pulses, and
* considers any overscan as part of the displayed area, given that
* the overscan is also stretched.
*
* This also attempts to determine panel dimensions but cannot do
* so for one that is "auto-stretched".
*/
if (pATI->Chip == ATI_CHIP_264LT)
{
pATIHW->lcd_gen_ctrl = inr(LCD_GEN_CTRL);
/* Set up to read non-shadow registers */
if (pATIHW->lcd_gen_ctrl & SHADOW_RW_EN)
outr(LCD_GEN_CTRL, pATIHW->lcd_gen_ctrl & ~SHADOW_RW_EN);
}
else /* if ((pATI->Chip == ATI_CHIP_264LTPRO) ||
(pATI->Chip == ATI_CHIP_264XL) ||
(pATI->Chip == ATI_CHIP_MOBILITY)) */
{
pATIHW->lcd_index = inr(LCD_INDEX);
pATIHW->config_panel = ATIMach64GetLCDReg(LCD_CONFIG_PANEL);
pATIHW->lcd_gen_ctrl = ATIMach64GetLCDReg(LCD_GEN_CNTL);
/* Set up to read non-shadow registers */
if (pATIHW->lcd_gen_ctrl & SHADOW_RW_EN)
ATIMach64PutLCDReg(LCD_GEN_CNTL,
pATIHW->lcd_gen_ctrl & ~SHADOW_RW_EN);
}
#ifndef AVOID_CPIO
if (!(pATIHW->crtc_gen_cntl & CRTC_EXT_DISP_EN))
{
unsigned HBlankStart, HSyncStart, HSyncEnd, HBlankEnd, HTotal;
unsigned VBlankStart, VSyncStart, VSyncEnd, VBlankEnd, VTotal;
pATIHW->clock = (inb(R_GENMO) & 0x0CU) >> 2;
pATIHW->crt[2] = GetReg(CRTX(pATI->CPIO_VGABase), 0x02U);
pATIHW->crt[3] = GetReg(CRTX(pATI->CPIO_VGABase), 0x03U);
pATIHW->crt[5] = GetReg(CRTX(pATI->CPIO_VGABase), 0x05U);
pATIHW->crt[7] = GetReg(CRTX(pATI->CPIO_VGABase), 0x07U);
pATIHW->crt[9] = GetReg(CRTX(pATI->CPIO_VGABase), 0x09U);
pATIHW->crt[21] = GetReg(CRTX(pATI->CPIO_VGABase), 0x15U);
pATIHW->crt[22] = GetReg(CRTX(pATI->CPIO_VGABase), 0x16U);
pATIHW->crtc_h_total_disp = inr(CRTC_H_TOTAL_DISP);
pATIHW->crtc_h_sync_strt_wid = inr(CRTC_H_SYNC_STRT_WID);
pATIHW->crtc_v_total_disp = inr(CRTC_V_TOTAL_DISP);
pATIHW->crtc_v_sync_strt_wid = inr(CRTC_V_SYNC_STRT_WID);
/* Switch to shadow registers */
if (pATI->Chip == ATI_CHIP_264LT)
outr(LCD_GEN_CTRL, pATIHW->lcd_gen_ctrl | SHADOW_RW_EN);
else /* if ((pATI->Chip == ATI_CHIP_264LTPRO) ||
(pATI->Chip == ATI_CHIP_264XL) ||
(pATI->Chip == ATI_CHIP_MOBILITY)) */
ATIMach64PutLCDReg(LCD_GEN_CNTL,
pATIHW->lcd_gen_ctrl | SHADOW_RW_EN);
pATIHW->shadow_vga[2] =
GetReg(CRTX(pATI->CPIO_VGABase), 0x02U);
pATIHW->shadow_vga[3] =
GetReg(CRTX(pATI->CPIO_VGABase), 0x03U);
pATIHW->shadow_vga[5] =
GetReg(CRTX(pATI->CPIO_VGABase), 0x05U);
pATIHW->shadow_vga[7] =
GetReg(CRTX(pATI->CPIO_VGABase), 0x07U);
pATIHW->shadow_vga[9] =
GetReg(CRTX(pATI->CPIO_VGABase), 0x09U);
pATIHW->shadow_vga[21] =
GetReg(CRTX(pATI->CPIO_VGABase), 0x15U);
pATIHW->shadow_vga[22] =
GetReg(CRTX(pATI->CPIO_VGABase), 0x16U);
pATIHW->shadow_h_total_disp = inr(CRTC_H_TOTAL_DISP);
pATIHW->shadow_h_sync_strt_wid = inr(CRTC_H_SYNC_STRT_WID);
pATIHW->shadow_v_total_disp = inr(CRTC_V_TOTAL_DISP);
pATIHW->shadow_v_sync_strt_wid = inr(CRTC_V_SYNC_STRT_WID);
/*
* HSyncStart and HSyncEnd should equal their shadow
* counterparts. Otherwise, due to a chip bug, the panel might
* not sync, regardless of which register set is used to drive
* the panel. There are certain combinations of register
* values where the panel does in fact sync, but it remains
* impossible to accurately determine the horizontal sync pulse
* timing actually seen by the panel.
*
* Note that this hardware bug does not affect the CRT output.
*/
if (((pATIHW->crtc_h_sync_strt_wid ^
pATIHW->shadow_h_sync_strt_wid) &
(CRTC_H_SYNC_STRT | CRTC_H_SYNC_STRT_HI |
CRTC_H_SYNC_WID)))
{
xf86DrvMsgVerb(pScreenInfo->scrnIndex, X_NOTICE, 0,
"Invalid horizontal sync pulse timing detected in mode"
" on server entry.\n");
/* Don't trust input timing */
pATI->OptionLCDSync = TRUE;
ModeType = 0;
}
/* Merge in shadow registers as appropriate */
if (pATIHW->lcd_gen_ctrl & SHADOW_EN)
{
pATIHW->crt[2] = pATIHW->shadow_vga[2];
pATIHW->crt[3] = pATIHW->shadow_vga[3];
pATIHW->crt[5] = pATIHW->shadow_vga[5];
/* XXX Does this apply to VGA? If so, what about the LT? */
if ((pATI->Chip < ATI_CHIP_264LTPRO) ||
!(pATIHW->config_panel & DONT_SHADOW_HEND))
{
pATIHW->crtc_h_total_disp &= ~CRTC_H_DISP;
pATIHW->crtc_h_total_disp |=
pATIHW->shadow_h_total_disp & CRTC_H_DISP;
}
pATIHW->crtc_h_total_disp &= ~CRTC_H_TOTAL;
pATIHW->crtc_h_total_disp |=
pATIHW->shadow_h_total_disp & CRTC_H_TOTAL;
pATIHW->crtc_h_sync_strt_wid =
pATIHW->shadow_h_sync_strt_wid;
/* XXX Does this apply to VGA? */
if (pATIHW->lcd_gen_ctrl & USE_SHADOWED_VEND)
{
pATIHW->crtc_v_total_disp &= ~CRTC_V_DISP;
pATIHW->crtc_v_total_disp |=
pATIHW->shadow_v_total_disp & CRTC_V_DISP;
}
if (!(pATIHW->lcd_gen_ctrl & DONT_SHADOW_VPAR))
{
pATIHW->crt[7] = pATIHW->shadow_vga[7];
pATIHW->crt[9] = pATIHW->shadow_vga[9];
pATIHW->crt[21] = pATIHW->shadow_vga[21];
pATIHW->crt[22] = pATIHW->shadow_vga[22];
pATIHW->crtc_v_total_disp &= ~CRTC_V_TOTAL;
pATIHW->crtc_v_total_disp |=
pATIHW->shadow_v_total_disp & CRTC_V_TOTAL;
}
}
if (!(pATIHW->lcd_gen_ctrl & DONT_SHADOW_VPAR))
pATIHW->crtc_v_sync_strt_wid =
pATIHW->shadow_v_sync_strt_wid;
/*
* Decipher input timing. This is complicated by the fact that
* the full width of all timing parameters, except for the
* blanking pulses, is only available through the accelerator
* registers, not the VGA ones. Blanking pulse boundaries must
* then be interpolated.
*
* Note that, in VGA mode, the accelerator's sync width fields
* are actually end positions, not widths.
*/
HDisplay = GetBits(pATIHW->crtc_h_total_disp, CRTC_H_DISP);
HSyncStart =
(GetBits(pATIHW->crtc_h_sync_strt_wid,
CRTC_H_SYNC_STRT_HI) *
(MaxBits(CRTC_H_SYNC_STRT) + 1)) |
GetBits(pATIHW->crtc_h_sync_strt_wid, CRTC_H_SYNC_STRT);
HSyncEnd = (HSyncStart & ~MaxBits(CRTC_H_SYNC_WID)) |
GetBits(pATIHW->crtc_h_sync_strt_wid, CRTC_H_SYNC_WID);
if (HSyncStart >= HSyncEnd)
HSyncEnd += MaxBits(CRTC_H_SYNC_WID) + 1;
HTotal = GetBits(pATIHW->crtc_h_total_disp, CRTC_H_TOTAL);
HBlankStart = (HDisplay & ~0xFFU) | pATIHW->crt[2];
if (HDisplay > HBlankStart)
HBlankStart += 0x0100U;
HBlankEnd = (HSyncEnd & ~0x3FU) |
((pATIHW->crt[5] >> 2) & 0x20U) |
(pATIHW->crt[3] & 0x1FU);
if (HSyncEnd > (HBlankEnd + 1))
HBlankEnd += 0x40U;
VDisplay = GetBits(pATIHW->crtc_v_total_disp, CRTC_V_DISP);
VSyncStart =
GetBits(pATIHW->crtc_v_sync_strt_wid, CRTC_V_SYNC_STRT);
VSyncEnd = (VSyncStart & ~MaxBits(CRTC_V_SYNC_END_VGA)) |
GetBits(pATIHW->crtc_v_sync_strt_wid, CRTC_V_SYNC_END_VGA);
if (VSyncStart > VSyncEnd)
VSyncEnd += MaxBits(CRTC_V_SYNC_END_VGA) + 1;
VTotal = GetBits(pATIHW->crtc_v_total_disp, CRTC_V_TOTAL);
VBlankStart = (VDisplay & ~0x03FFU) |
((pATIHW->crt[9] << 4) & 0x0200U) |
((pATIHW->crt[7] << 5) & 0x0100U) | pATIHW->crt[21];
if (VDisplay > VBlankStart)
VBlankStart += 0x0400U;
VBlankEnd = (VSyncEnd & ~0x00FFU) | pATIHW->crt[22];
if (VSyncEnd > (VBlankEnd + 1))
VBlankEnd += 0x0100U;
pATI->LCDHBlankWidth = HBlankEnd - HBlankStart;
pATI->LCDHSyncStart = HSyncStart - HBlankStart;
pATI->LCDHSyncWidth = HSyncEnd - HSyncStart;
pATI->LCDVBlankWidth = VBlankEnd - VBlankStart;
pATI->LCDVSyncStart = VSyncStart - VBlankStart;
pATI->LCDVSyncWidth = VSyncEnd - VSyncStart;
HDisplay = HTotal + 5 - pATI->LCDHBlankWidth;
VDisplay = VTotal + 2 - pATI->LCDVBlankWidth;
}
else
#endif /* AVOID_CPIO */
{
pATIHW->clock = inr(CLOCK_CNTL) & 0x03U;
pATIHW->crtc_h_total_disp = inr(CRTC_H_TOTAL_DISP);
pATIHW->crtc_h_sync_strt_wid = inr(CRTC_H_SYNC_STRT_WID);
pATIHW->crtc_v_total_disp = inr(CRTC_V_TOTAL_DISP);
pATIHW->crtc_v_sync_strt_wid = inr(CRTC_V_SYNC_STRT_WID);
pATIHW->ovr_wid_left_right = inr(OVR_WID_LEFT_RIGHT);
pATIHW->ovr_wid_top_bottom = inr(OVR_WID_TOP_BOTTOM);
/* Switch to shadow registers */
if (pATI->Chip == ATI_CHIP_264LT)
outr(LCD_GEN_CTRL, pATIHW->lcd_gen_ctrl | SHADOW_RW_EN);
else /* if ((pATI->Chip == ATI_CHIP_264LTPRO) ||
(pATI->Chip == ATI_CHIP_264XL) ||
(pATI->Chip == ATI_CHIP_MOBILITY)) */
ATIMach64PutLCDReg(LCD_GEN_CNTL,
pATIHW->lcd_gen_ctrl | SHADOW_RW_EN);
/* Oddly enough, there are no shadow overscan registers */
pATIHW->shadow_h_total_disp = inr(CRTC_H_TOTAL_DISP);
pATIHW->shadow_h_sync_strt_wid = inr(CRTC_H_SYNC_STRT_WID);
pATIHW->shadow_v_total_disp = inr(CRTC_V_TOTAL_DISP);
pATIHW->shadow_v_sync_strt_wid = inr(CRTC_V_SYNC_STRT_WID);
/*
* HSyncStart and HSyncEnd should equal their shadow
* counterparts. Otherwise, due to a chip bug, the panel might
* not sync, regardless of which register set is used to drive
* the panel. There are certain combinations of register
* values where the panel does in fact sync, but it remains
* impossible to accurately determine the horizontal sync pulse
* timing actually seen by the panel.
*
* Note that this hardware bug does not affect the CRT output.
*/
if (((pATIHW->crtc_h_sync_strt_wid ^
pATIHW->shadow_h_sync_strt_wid) &
(CRTC_H_SYNC_STRT | CRTC_H_SYNC_STRT_HI |
CRTC_H_SYNC_WID)))
{
xf86DrvMsgVerb(pScreenInfo->scrnIndex, X_NOTICE, 0,
"Invalid horizontal sync pulse timing detected in mode"
" on server entry.\n");
/* Don't trust input timing */
pATI->OptionLCDSync = TRUE;
ModeType = 0;
}
/* Merge in shadow registers as appropriate */
if (pATIHW->lcd_gen_ctrl & SHADOW_EN)
{
/* XXX What about the LT? */
if ((pATI->Chip < ATI_CHIP_264LTPRO) ||
!(pATIHW->config_panel & DONT_SHADOW_HEND))
{
pATIHW->crtc_h_total_disp &= ~CRTC_H_DISP;
pATIHW->crtc_h_total_disp |=
pATIHW->shadow_h_total_disp & CRTC_H_DISP;
}
pATIHW->crtc_h_total_disp &= ~CRTC_H_TOTAL;
pATIHW->crtc_h_total_disp |=
pATIHW->shadow_h_total_disp & CRTC_H_TOTAL;
pATIHW->crtc_h_sync_strt_wid =
pATIHW->shadow_h_sync_strt_wid;
if (pATIHW->lcd_gen_ctrl & USE_SHADOWED_VEND)
{
pATIHW->crtc_v_total_disp &= ~CRTC_V_DISP;
pATIHW->crtc_v_total_disp |=
pATIHW->shadow_v_total_disp & CRTC_V_DISP;
}
if (!(pATIHW->lcd_gen_ctrl & DONT_SHADOW_VPAR))
{
pATIHW->crtc_v_total_disp &= ~CRTC_V_TOTAL;
pATIHW->crtc_v_total_disp |=
pATIHW->shadow_v_total_disp & CRTC_V_TOTAL;
}
}
if (!(pATIHW->lcd_gen_ctrl & DONT_SHADOW_VPAR))
pATIHW->crtc_v_sync_strt_wid =
pATIHW->shadow_v_sync_strt_wid;
/* Decipher input timing */
HDisplay = GetBits(pATIHW->crtc_h_total_disp, CRTC_H_DISP) +
GetBits(pATIHW->ovr_wid_left_right, OVR_WID_LEFT) +
GetBits(pATIHW->ovr_wid_left_right, OVR_WID_RIGHT);
VDisplay = GetBits(pATIHW->crtc_v_total_disp, CRTC_V_DISP) +
GetBits(pATIHW->ovr_wid_top_bottom, OVR_WID_TOP) +
GetBits(pATIHW->ovr_wid_top_bottom, OVR_WID_BOTTOM);
pATI->LCDHSyncStart =
(GetBits(pATIHW->crtc_h_sync_strt_wid,
CRTC_H_SYNC_STRT_HI) *
(MaxBits(CRTC_H_SYNC_STRT) + 1)) +
GetBits(pATIHW->crtc_h_sync_strt_wid, CRTC_H_SYNC_STRT) -
HDisplay;
pATI->LCDHSyncWidth =
GetBits(pATIHW->crtc_h_sync_strt_wid, CRTC_H_SYNC_WID);
pATI->LCDHBlankWidth =
GetBits(pATIHW->crtc_h_total_disp, CRTC_H_TOTAL) -
HDisplay;
pATI->LCDVSyncStart =
GetBits(pATIHW->crtc_v_sync_strt_wid, CRTC_V_SYNC_STRT) -
VDisplay;
pATI->LCDVSyncWidth =
GetBits(pATIHW->crtc_v_sync_strt_wid, CRTC_V_SYNC_WID);
pATI->LCDVBlankWidth =
GetBits(pATIHW->crtc_v_total_disp, CRTC_V_TOTAL) -
VDisplay;
HDisplay++;
VDisplay++;
}
/* Restore LCD registers */
if (pATI->Chip == ATI_CHIP_264LT)
{
outr(LCD_GEN_CTRL, pATIHW->lcd_gen_ctrl);
}
else /* if ((pATI->Chip == ATI_CHIP_264LTPRO) ||
(pATI->Chip == ATI_CHIP_264XL) ||
(pATI->Chip == ATI_CHIP_MOBILITY)) */
{
ATIMach64PutLCDReg(LCD_GEN_CNTL, pATIHW->lcd_gen_ctrl);
outr(LCD_INDEX, pATIHW->lcd_index);
}
HDisplay <<= 3;
pATI->LCDHSyncStart <<= 3;
pATI->LCDHSyncWidth <<= 3;
pATI->LCDHBlankWidth <<= 3;
/* Calculate panel dimensions implied by the input timing */
if ((pATIHW->horz_stretching &
(HORZ_STRETCH_EN | AUTO_HORZ_RATIO)) ==
HORZ_STRETCH_EN)
{
if (pATIHW->horz_stretching & HORZ_STRETCH_MODE)
{
if (pATIHW->horz_stretching & HORZ_STRETCH_BLEND)
{
HDisplay =
(HDisplay * (MaxBits(HORZ_STRETCH_BLEND) + 1)) /
GetBits(pATIHW->horz_stretching,
HORZ_STRETCH_BLEND);
}
}
else if (((pATIHW->horz_stretching & HORZ_STRETCH_LOOP) >
HORZ_STRETCH_LOOP15) ||
(pATIHW->horz_stretching &
SetBits(1, HORZ_STRETCH_RATIO)))
{
xf86DrvMsg(pScreenInfo->scrnIndex, X_WARNING,
"Ignoring invalid horizontal stretch ratio in mode on"
" server entry.\n");
}
else
{
IOValue =
GetBits(pATIHW->horz_stretching, HORZ_STRETCH_RATIO);
switch (GetBits(pATIHW->horz_stretching,
HORZ_STRETCH_LOOP))
{
case GetBits(HORZ_STRETCH_LOOP09, HORZ_STRETCH_LOOP):
i = 9;
IOValue &= (1 << 9) - 1;
break;
case GetBits(HORZ_STRETCH_LOOP11, HORZ_STRETCH_LOOP):
i = 11;
IOValue &= (1 << 11) - 1;
break;
case GetBits(HORZ_STRETCH_LOOP12, HORZ_STRETCH_LOOP):
i = 12;
IOValue &= (1 << 12) - 1;
break;
case GetBits(HORZ_STRETCH_LOOP14, HORZ_STRETCH_LOOP):
i = 14;
IOValue &= (1 << 14) - 1;
break;
case GetBits(HORZ_STRETCH_LOOP15, HORZ_STRETCH_LOOP):
default: /* Muffle compiler */
i = 15;
IOValue &= (1 << 15) - 1;
break;
}
if (IOValue)
{
/* Count the number of bits in IOValue */
j = (IOValue >> 1) & 0x36DBU;
j = IOValue - j - ((j >> 1) & 0x36DBU);
j = ((j + (j >> 3)) & 0x71C7U) % 0x3FU;
HDisplay = (HDisplay * i) / j;
}
}
}
if ((pATIHW->vert_stretching & VERT_STRETCH_EN) &&
!(pATIHW->ext_vert_stretch & AUTO_VERT_RATIO))
{
if ((pATIHW->vert_stretching & VERT_STRETCH_USE0) ||
(VDisplay <= 350))
IOValue =
GetBits(pATIHW->vert_stretching, VERT_STRETCH_RATIO0);
else if (VDisplay <= 400)
IOValue =
GetBits(pATIHW->vert_stretching, VERT_STRETCH_RATIO1);
else if ((VDisplay <= 480) ||
!(pATIHW->ext_vert_stretch & VERT_STRETCH_RATIO3))
IOValue =
GetBits(pATIHW->vert_stretching, VERT_STRETCH_RATIO2);
else
IOValue =
GetBits(pATIHW->ext_vert_stretch, VERT_STRETCH_RATIO3);
if (IOValue)
VDisplay =
(VDisplay * (MaxBits(VERT_STRETCH_RATIO0) + 1)) /
IOValue;
}
/* Match calculated dimensions to probed dimensions */
if (!pATI->LCDHorizontal)
{
if ((pATIHW->horz_stretching &
(HORZ_STRETCH_EN | AUTO_HORZ_RATIO)) !=
(HORZ_STRETCH_EN | AUTO_HORZ_RATIO))
pATI->LCDHorizontal = HDisplay;
}
else if (pATI->LCDHorizontal != (int)HDisplay)
{
if ((pATIHW->horz_stretching &
(HORZ_STRETCH_EN | AUTO_HORZ_RATIO)) !=
(HORZ_STRETCH_EN | AUTO_HORZ_RATIO))
xf86DrvMsgVerb(pScreenInfo->scrnIndex, X_WARNING, 4,
"Inconsistent panel horizontal dimension:"
" %d and %d.\n", pATI->LCDHorizontal, HDisplay);
HDisplay = pATI->LCDHorizontal;
}
if (!pATI->LCDVertical)
{
if (!(pATIHW->vert_stretching & VERT_STRETCH_EN) ||
!(pATIHW->ext_vert_stretch & AUTO_VERT_RATIO))
pATI->LCDVertical = VDisplay;
}
else if (pATI->LCDVertical != (int)VDisplay)
{
if (!(pATIHW->vert_stretching & VERT_STRETCH_EN) ||
!(pATIHW->ext_vert_stretch & AUTO_VERT_RATIO))
xf86DrvMsgVerb(pScreenInfo->scrnIndex, X_WARNING, 4,
"Inconsistent panel vertical dimension: %d and %d.\n",
pATI->LCDVertical, VDisplay);
VDisplay = pATI->LCDVertical;
}
if (!pATI->LCDHorizontal || !pATI->LCDVertical)
{
if (pATI->LCDPanelID || (pATI->Chip <= ATI_CHIP_264LTPRO))
xf86DrvMsg(pScreenInfo->scrnIndex, X_ERROR,
"Unable to determine dimensions of panel (ID %d).\n",
pATI->LCDPanelID);
else
xf86DrvMsg(pScreenInfo->scrnIndex, X_ERROR,
"Unable to determine dimensions of panel.\n");
goto bail;
}
/* If the mode on entry wasn't stretched, adjust timings */
if (!(pATIHW->horz_stretching & HORZ_STRETCH_EN) &&
(pATI->LCDHorizontal > (int)HDisplay))
{
HDisplay = pATI->LCDHorizontal - HDisplay;
if (pATI->LCDHSyncStart >= HDisplay)
pATI->LCDHSyncStart -= HDisplay;
else
pATI->LCDHSyncStart = 0;
pATI->LCDHBlankWidth -= HDisplay;
HDisplay = pATI->LCDHSyncStart + pATI->LCDHSyncWidth;
if (pATI->LCDHBlankWidth < HDisplay)
pATI->LCDHBlankWidth = HDisplay;
}
if (!(pATIHW->vert_stretching & VERT_STRETCH_EN) &&
(pATI->LCDVertical > (int)VDisplay))
{
VDisplay = pATI->LCDVertical - VDisplay;
if (pATI->LCDVSyncStart >= VDisplay)
pATI->LCDVSyncStart -= VDisplay;
else
pATI->LCDVSyncStart = 0;
pATI->LCDVBlankWidth -= VDisplay;
VDisplay = pATI->LCDVSyncStart + pATI->LCDVSyncWidth;
if (pATI->LCDVBlankWidth < VDisplay)
pATI->LCDVBlankWidth = VDisplay;
}
if (pATI->LCDPanelID || (pATI->Chip <= ATI_CHIP_264LTPRO))
xf86DrvMsg(pScreenInfo->scrnIndex, X_PROBED,
"%dx%d panel (ID %d) detected.\n",
pATI->LCDHorizontal, pATI->LCDVertical, pATI->LCDPanelID);
else
xf86DrvMsg(pScreenInfo->scrnIndex, X_PROBED,
"%dx%d panel detected.\n",
pATI->LCDHorizontal, pATI->LCDVertical);
/*
* Determine panel clock. This must be done after option
* processing so that the adapter's reference frequency is always
* available.
*
* Get post divider. A GCC bug has caused the following expression
* to be broken down into its individual components.
*/
ClockMask = PLL_VCLK0_XDIV << pATIHW->clock;
PostMask = PLL_VCLK0_POST_DIV << (pATIHW->clock * 2);
i = GetBits(ATIMach64GetPLLReg(PLL_XCLK_CNTL), ClockMask);
i *= MaxBits(PLL_VCLK0_POST_DIV) + 1;
i |= GetBits(ATIMach64GetPLLReg(PLL_VCLK_POST_DIV), PostMask);
/* Calculate clock of mode on entry */
Numerator = ATIMach64GetPLLReg(PLL_VCLK0_FB_DIV + pATIHW->clock) *
pATI->ReferenceNumerator;
Denominator = pATI->ClockDescriptor.MinM *
pATI->ReferenceDenominator *
pATI->ClockDescriptor.PostDividers[i];
pATI->LCDClock = ATIDivide(Numerator, Denominator, 1, 0);
xf86DrvMsg(pScreenInfo->scrnIndex, X_PROBED,
"Panel clock is %.3f MHz.\n",
(double)(pATI->LCDClock) / 1000.0);
xf86DrvMsg(pScreenInfo->scrnIndex, X_INFO,
"Using digital flat panel interface%s.\n",
pATI->OptionCRTDisplay ?
" to display on both CRT and panel" : "");
}
}
/*
* Finish detecting video RAM size.
*/
pScreenInfo->videoRam = pATI->VideoRAM;
{
{
/* Get adapter's linear aperture configuration */
pATIHW->config_cntl = inr(CONFIG_CNTL);
pATI->LinearBase =
GetBits(pATIHW->config_cntl, CFG_MEM_AP_LOC) << 22;
if ((pATIHW->config_cntl & CFG_MEM_AP_SIZE) != CFG_MEM_AP_SIZE)
{
pATI->LinearSize =
GetBits(pATIHW->config_cntl, CFG_MEM_AP_SIZE) << 22;
/*
* Linear aperture could have been disabled (but still
* assigned) by BIOS initialisation.
*/
if (pATI->LinearBase && !pATI->LinearSize)
{
if ((pATI->Chip <= ATI_CHIP_88800GXD) &&
(pATI->VideoRAM < 4096))
pATI->LinearSize = 4 * 1024 * 1024;
else
pATI->LinearSize = 8 * 1024 * 1024;
}
}
if (pATI->LinearBase && pATI->LinearSize)
{
int AcceleratorVideoRAM = 0, ServerVideoRAM;
#ifndef AVOID_CPIO
/*
* Unless specified in PCI configuration space, set MMIO
* address to tail end of linear aperture.
*/
if (!pATI->Block0Base)
{
pATI->Block0Base =
pATI->LinearBase + pATI->LinearSize - 0x00000400U;
pATI->MMIOInLinear = TRUE;
}
#endif /* AVOID_CPIO */
AcceleratorVideoRAM = pATI->LinearSize >> 10;
/*
* Account for MMIO area at the tail end of the linear
* aperture, if it is needed or if it cannot be disabled.
*/
if (pATI->MMIOInLinear || (pATI->Chip < ATI_CHIP_264VTB))
AcceleratorVideoRAM -= 2;
ServerVideoRAM = pATI->VideoRAM;
if (pATI->Cursor > ATI_CURSOR_SOFTWARE)
{
/*
* Allocate a 1 kB cursor image area at the top of the
* little-endian aperture, just before any MMIO area that
* might also be there.
*/
if (ServerVideoRAM > AcceleratorVideoRAM)
ServerVideoRAM = AcceleratorVideoRAM;
ServerVideoRAM--;
pATI->CursorOffset = ServerVideoRAM << 10;
pATI->CursorBase = pATI->LinearBase + pATI->CursorOffset;
xf86DrvMsg(pScreenInfo->scrnIndex, X_INFO,
"Storing hardware cursor image at 0x%08lX.\n",
pATI->CursorBase);
}
{
CARD32 PageSize = getpagesize() >> 10;
#if X_BYTE_ORDER == X_LITTLE_ENDIAN
/*
* MMIO areas must be mmap()'ed separately to avoid write
* combining them. Thus, they might not end up still
* adjacent with the little-endian linear aperture after
* mmap()'ing. So, round down the linear aperture size to
* avoid an overlap. Any hardware cursor image area might
* not end up being write combined, but this seems
* preferable to further reducing the video memory size
* advertised to the server.
*
* XXX Ideally this should be dealt with in the os-support
* layer, i.e., it should be possible to reset a
* subarea's write combining after it has been
* mmap()'ed, but doing so currently causes the removal
* of write combining for the entire aperture.
*/
if (pATI->MMIOInLinear)
AcceleratorVideoRAM -= AcceleratorVideoRAM % PageSize;
#else /* if X_BYTE_ORDER != X_LITTLE_ENDIAN */
/*
* Big-endian apertures are 8 MB higher and don't contain
* an MMIO area.
*/
pATI->LinearBase += 0x00800000U;
AcceleratorVideoRAM = pATI->LinearSize >> 10;
#endif /* X_BYTE_ORDER */
if (ServerVideoRAM > AcceleratorVideoRAM)
ServerVideoRAM = AcceleratorVideoRAM;
else if (AcceleratorVideoRAM > pATI->VideoRAM)
AcceleratorVideoRAM = pATI->VideoRAM;
PageSize--;
AcceleratorVideoRAM =
(AcceleratorVideoRAM + PageSize) & ~PageSize;
xf86DrvMsg(pScreenInfo->scrnIndex, X_INFO,
"Using %d MB linear aperture at 0x%08lX.\n",
pATI->LinearSize >> 20, pATI->LinearBase);
/* Only mmap what is needed */
ApertureSize = pATI->LinearSize =
AcceleratorVideoRAM << 10;
}
if (ServerVideoRAM < pATI->VideoRAM)
{
pScreenInfo->videoRam = ServerVideoRAM;
xf86DrvMsg(pScreenInfo->scrnIndex, X_NOTICE,
"Virtual resolutions will be limited to %d kB\n due to"
" linear aperture size and/or placement of hardware"
" cursor image area.\n",
ServerVideoRAM);
}
}
}
if (!pATI->LinearBase || !pATI->LinearSize)
{
xf86DrvMsg(pScreenInfo->scrnIndex, X_ERROR,
"Linear aperture not available.\n");
goto bail;
}
if (pATI->Block0Base)
{
xf86DrvMsg(pScreenInfo->scrnIndex, X_INFO,
"Using Block 0 MMIO aperture at 0x%08lX.\n", pATI->Block0Base);
/* Set Block1 MMIO address if supported */
if (pATI->Chip >= ATI_CHIP_264VT)
{
pATI->Block1Base = pATI->Block0Base - 0x00000400U;
xf86DrvMsg(pScreenInfo->scrnIndex, X_INFO,
"Using Block 1 MMIO aperture at 0x%08lX.\n",
pATI->Block1Base);
}
}
}
#ifndef XSERVER_LIBPCIACCESS
#ifndef AVOID_CPIO
if (pATI->VGAAdapter)
{
/*
* Free VGA memory aperture during operating state (but it is still
* decoded).
*/
pResources = xf86SetOperatingState(resVgaMem, pATI->iEntity,
ResUnusedOpr);
if (pResources)
{
xf86DrvMsg(pScreenInfo->scrnIndex, X_WARNING,
"Logic error setting operating state for VGA memory"
" aperture.\n");
xf86FreeResList(pResources);
}
}
#endif /* AVOID_CPIO */
#endif
/*
* Remap apertures. Must lock and re-unlock around this in case the
* remapping fails.
*/
ATILock(pATI);
ATIUnmapApertures(pScreenInfo->scrnIndex, pATI);
if (!ATIMapApertures(pScreenInfo->scrnIndex, pATI))
return FALSE;
ATIUnlock(pATI);
if (pATI->OptionAccel)
{
xf86DrvMsg(pScreenInfo->scrnIndex, X_INFO,
"MMIO write caching %sabled.\n",
pATI->OptionMMIOCache ? "en" : "dis");
}
{
if (pATI->Chip >= ATI_CHIP_264CT)
ATIReportMemory(pScreenInfo, pATI,
ATIMemoryTypeNames_264xT[pATI->MemoryType]);
else if (pATI->Chip == ATI_CHIP_88800CX)
ATIReportMemory(pScreenInfo, pATI,
ATIMemoryTypeNames_88800CX[pATI->MemoryType]);
else
ATIReportMemory(pScreenInfo, pATI,
ATIMemoryTypeNames_Mach[pATI->MemoryType]);
}
/*
* Finish banking setup. This needs to be fixed to not assume the mode on
* entry is a VGA mode. XXX
*/
#ifndef AVOID_CPIO
if (!pATI->VGAAdapter)
{
pATI->NewHW.SetBank = ATIx8800SetBank;
pATI->NewHW.nPlane = 0;
pATIHW->crtc = pATI->NewHW.crtc;
pATIHW->SetBank = (ATIBankProcPtr)NoopDDA;
}
else
{
Bool ext_disp_en = (pATI->LockData.crtc_gen_cntl & CRTC_EXT_DISP_EN);
Bool vga_ap_en = (pATI->LockData.config_cntl & CFG_MEM_VGA_AP_EN);
Bool vga_color_256 = (GetReg(SEQX, 0x04U) & 0x08U);
pATI->NewHW.SetBank = ATIMach64SetBankPacked;
pATI->NewHW.nPlane = 1;
pATIHW->crtc = ATI_CRTC_VGA;
if (ext_disp_en)
pATIHW->crtc = ATI_CRTC_MACH64;
if ((pATIHW->crtc != ATI_CRTC_VGA) || vga_color_256)
pATIHW->nPlane = 1;
else
pATIHW->nPlane = 4;
/* VideoRAM is a multiple of 512kB and BankSize is 64kB */
pATIHW->nBank = pATI->VideoRAM / (pATIHW->nPlane * 0x40U);
if ((pATIHW->crtc == ATI_CRTC_VGA) && !vga_ap_en)
{
pATIHW->SetBank = (ATIBankProcPtr)NoopDDA;
pATIHW->nBank = 1;
}
else if (pATIHW->nPlane == 1)
{
pATIHW->SetBank = ATIMach64SetBankPacked;
}
else
{
pATIHW->SetBank = ATIMach64SetBankPlanar;
}
}
#else /* AVOID_CPIO */
{
pATIHW->crtc = pATI->NewHW.crtc;
}
#endif /* AVOID_CPIO */
if (pATI->OptionShadowFB)
{
/* Until ShadowFB becomes a true screen wrapper, if it ever does... */
if (pATI->OptionAccel)
{
xf86DrvMsg(pScreenInfo->scrnIndex, X_WARNING,
"Cannot shadow an accelerated frame buffer.\n");
pATI->OptionShadowFB = FALSE;
}
else
{
xf86DrvMsg(pScreenInfo->scrnIndex, X_INFO,
"Using shadow frame buffer.\n");
}
}
/* 264VT-B's and later have DSP registers */
if ((pATI->Chip >= ATI_CHIP_264VTB) &&
!ATIDSPPreInit(pScreenInfo->scrnIndex, pATI))
goto bail;
/*
* Determine minClock and maxClock. For adapters with supported
* programmable clock generators, start with an absolute maximum.
*/
if (pATI->ClockDescriptor.MaxN > 0)
{
Numerator = pATI->ClockDescriptor.MaxN * pATI->ReferenceNumerator;
Denominator = pATI->ClockDescriptor.MinM * pATI->ReferenceDenominator *
pATI->ClockDescriptor.PostDividers[0];
/*
* An integrated PLL behaves as though the reference frequency were
* doubled. It also does not appear to care about the colour depth.
*/
if (pATI->ProgrammableClock == ATI_CLOCK_INTERNAL)
Numerator <<= 1;
ATIClockRange.maxClock = (Numerator / (Denominator * 1000)) * 1000;
Numerator = pATI->ClockDescriptor.MinN * pATI->ReferenceNumerator;
Denominator = pATI->ClockDescriptor.MaxM * pATI->ReferenceDenominator *
pATI->ClockDescriptor.PostDividers[pATI->ClockDescriptor.NumD - 1];
if (pATI->ProgrammableClock == ATI_CLOCK_INTERNAL)
Numerator <<= 1;
ATIClockRange.minClock = (Numerator / (Denominator * 1000)) * 1000;
if (pATI->XCLKFeedbackDivider)
{
/* Possibly reduce maxClock due to memory bandwidth */
Numerator = pATI->XCLKFeedbackDivider * 2 *
pATI->ReferenceNumerator;
Denominator = pATI->ClockDescriptor.MinM *
pATI->XCLKReferenceDivider * pATI->ReferenceDenominator;
{
Denominator *= pATI->bitsPerPixel / 4;
}
i = (6 - 2) - pATI->XCLKPostDivider;
i = (ATIDivide(Numerator, Denominator, i, -1) / 1000) * 1000;
if (i < ATIClockRange.maxClock)
ATIClockRange.maxClock = i;
}
}
/*
* Assume an internal DAC can handle whatever frequency the internal PLL
* can produce (with the reference divider set by BIOS initialisation), but
* default maxClock to a lower chip-specific default.
*/
if ((pATI->DAC & ~0x0FU) == ATI_DAC_INTERNAL)
{
int DacSpeed;
switch (pATI->bitsPerPixel)
{
case 15:
case 16:
DacSpeed = pGDev->dacSpeeds[DAC_BPP16];
break;
case 24:
DacSpeed = pGDev->dacSpeeds[DAC_BPP24];
break;
case 32:
DacSpeed = pGDev->dacSpeeds[DAC_BPP32];
break;
default:
DacSpeed = 0;
break;
}
if (!DacSpeed)
DacSpeed = pGDev->dacSpeeds[DAC_BPP8];
if (DacSpeed < ATIClockRange.maxClock)
{
DefaultmaxClock = 135000;
if (pATI->depth > 8)
DefaultmaxClock = 80000;
if ((pATI->Chip >= ATI_CHIP_264VTB) &&
(pATI->Chip != ATI_CHIP_Mach64))
{
if ((pATI->Chip >= ATI_CHIP_264VT4) &&
(pATI->Chip != ATI_CHIP_264LTPRO))
DefaultmaxClock = 230000;
else if (pATI->Chip >= ATI_CHIP_264VT3)
DefaultmaxClock = 200000;
else
DefaultmaxClock = 170000;
}
if (DacSpeed > DefaultmaxClock)
ATIClockRange.maxClock = DacSpeed;
else if (DefaultmaxClock < ATIClockRange.maxClock)
ATIClockRange.maxClock = DefaultmaxClock;
}
}
else
{
switch(pATI->DAC)
{
case ATI_DAC_STG1700:
case ATI_DAC_STG1702:
case ATI_DAC_STG1703:
DefaultmaxClock = 110000;
break;
case ATI_DAC_IBMRGB514:
pATI->maxClock = 220000;
{
DefaultmaxClock = 220000;
}
break;
default:
#ifndef AVOID_CPIO
if (pATI->CPIO_VGAWonder && (pATI->VideoRAM < 1024))
{
DefaultmaxClock =
(GetBits(BIOSByte(0x44U), 0x04U) * 5000) + 40000;
}
else
#endif /* AVOID_CPIO */
{
DefaultmaxClock = 80000;
}
break;
}
if (DefaultmaxClock < ATIClockRange.maxClock)
ATIClockRange.maxClock = DefaultmaxClock;
}
/*
* Determine available pixel clock frequencies.
*/
if ((pATI->ProgrammableClock <= ATI_CLOCK_FIXED) ||
(pATI->ProgrammableClock >= ATI_CLOCK_MAX))
{
xf86DrvMsg(pScreenInfo->scrnIndex, X_ERROR,
"Unsupported or non-programmable clock generator.\n");
goto bail;
}
ATIClockPreInit(pScreenInfo, pATI);
Strategy = LOOKUP_BEST_REFRESH;
/*
* Mode validation.
*/
if (pATI->Chip >= ATI_CHIP_264CT)
{
minPitch = 8;
}
else
{
minPitch = 16;
}
pitchInc = minPitch * pATI->bitsPerPixel;
if (pATI->Chip < ATI_CHIP_264VT)
{
/*
* ATI finally fixed accelerated doublescanning in the 264VT
* and later. On 88800's, the bit is documented to exist, but
* only doubles the vertical timings. On the 264CT and 264ET,
* the bit is ignored.
*/
ATIClockRange.doubleScanAllowed = FALSE;
}
maxPitch = minPitch * MaxBits(CRTC_PITCH);
if (pATI->OptionAccel)
{
/*
* Set engine restrictions on coordinate space. Use maxPitch for the
* horizontal and maxHeight for the vertical.
*/
if (maxPitch > (ATIMach64MaxX / pATI->XModifier))
maxPitch = ATIMach64MaxX / pATI->XModifier;
maxHeight = ATIMach64MaxY;
/*
* For SGRAM & WRAM adapters, the display engine limits the pitch to
* multiples of 64 bytes.
*/
if ((pATI->Chip >= ATI_CHIP_264CT) &&
((pATI->Chip >= ATI_CHIP_264VTB) ||
(pATI->MemoryType >= MEM_264_SGRAM)))
pitchInc = pATI->XModifier * (64 * 8);
}
if (pATI->OptionPanelDisplay && (pATI->LCDPanelID >= 0))
{
/*
* Given LCD modes are more tightly controlled than CRT modes, allow
* the user the option of not specifying a panel's horizontal sync
* and/or vertical refresh tolerances.
*/
Strategy |= LOOKUP_OPTIONAL_TOLERANCES;
if (ModeType == M_T_BUILTIN)
{
/*
* Add a mode to the end of the monitor's list for the panel's
* native resolution.
*/
pMode = (DisplayModePtr)xnfcalloc(1, SizeOf(DisplayModeRec));
pMode->name = "Native panel mode";
pMode->type = M_T_BUILTIN;
pMode->Clock = pATI->LCDClock;
pMode->HDisplay = pATI->LCDHorizontal;
pMode->VDisplay = pATI->LCDVertical;
/*
* These timings are bogus, but enough to survive sync tolerance
* checks.
*/
pMode->HSyncStart = pMode->HDisplay;
pMode->HSyncEnd = pMode->HSyncStart + minPitch;
pMode->HTotal = pMode->HSyncEnd + minPitch;
pMode->VSyncStart = pMode->VDisplay;
pMode->VSyncEnd = pMode->VSyncStart + 1;
pMode->VTotal = pMode->VSyncEnd + 1;
pMode->CrtcHDisplay = pMode->HDisplay;
pMode->CrtcHBlankStart = pMode->HDisplay;
pMode->CrtcHSyncStart = pMode->HSyncStart;
pMode->CrtcHSyncEnd = pMode->HSyncEnd;
pMode->CrtcHBlankEnd = pMode->HTotal;
pMode->CrtcHTotal = pMode->HTotal;
pMode->CrtcVDisplay = pMode->VDisplay;
pMode->CrtcVBlankStart = pMode->VDisplay;
pMode->CrtcVSyncStart = pMode->VSyncStart;
pMode->CrtcVSyncEnd = pMode->VSyncEnd;
pMode->CrtcVBlankEnd = pMode->VTotal;
pMode->CrtcVTotal = pMode->VTotal;
if (!pScreenInfo->monitor->Modes)
{
pScreenInfo->monitor->Modes = pMode;
}
else
{
pScreenInfo->monitor->Last->next = pMode;
pMode->prev = pScreenInfo->monitor->Last;
}
pScreenInfo->monitor->Last = pMode;
}
/*
* Defeat Xconfigurator brain damage. Ignore all HorizSync and
* VertRefresh specifications. For now, this does not take
* SYNC_TOLERANCE into account.
*/
if (pScreenInfo->monitor->nHsync > 0)
{
double hsync = (double)pATI->LCDClock /
(pATI->LCDHorizontal + pATI->LCDHBlankWidth);
for (i = 0; ; i++)
{
if (i >= pScreenInfo->monitor->nHsync)
{
xf86DrvMsg(pScreenInfo->scrnIndex, X_NOTICE,
"Conflicting XF86Config HorizSync specification(s)"
" ignored.\n");
break;
}
if ((hsync >= pScreenInfo->monitor->hsync[i].lo) &&
(hsync <= pScreenInfo->monitor->hsync[i].hi))
{
xf86DrvMsg(pScreenInfo->scrnIndex, X_WARNING,
"Extraneous XF86Config HorizSync specification(s)"
" ignored.\n");
break;
}
}
pScreenInfo->monitor->nHsync = 0;
}
if (pScreenInfo->monitor->nVrefresh > 0)
{
double vrefresh = ((double)pATI->LCDClock * 1000.0) /
((pATI->LCDHorizontal + pATI->LCDHBlankWidth) *
(pATI->LCDVertical + pATI->LCDVBlankWidth));
for (i = 0; ; i++)
{
if (i >= pScreenInfo->monitor->nVrefresh)
{
xf86DrvMsg(pScreenInfo->scrnIndex, X_NOTICE,
"Conflicting XF86Config VertRefresh specification(s)"
" ignored.\n");
break;
}
if ((vrefresh >= pScreenInfo->monitor->vrefresh[i].lo) &&
(vrefresh <= pScreenInfo->monitor->vrefresh[i].hi))
{
xf86DrvMsg(pScreenInfo->scrnIndex, X_WARNING,
"Extraneous XF86Config VertRefresh specification(s)"
" ignored.\n");
break;
}
}
pScreenInfo->monitor->nVrefresh = 0;
}
}
i = xf86ValidateModes(pScreenInfo,
pScreenInfo->monitor->Modes, pScreenInfo->display->modes,
&ATIClockRange, NULL, minPitch, maxPitch,
pitchInc, 0, maxHeight,
pScreenInfo->display->virtualX, pScreenInfo->display->virtualY,
ApertureSize, Strategy);
if (i <= 0)
goto bail;
/* Remove invalid modes */
xf86PruneDriverModes(pScreenInfo);
/* Set current mode to the first in the list */
pScreenInfo->currentMode = pScreenInfo->modes;
/* Print mode list */
xf86PrintModes(pScreenInfo);
/* Set display resolution */
xf86SetDpi(pScreenInfo, 0, 0);
/* Load required modules */
if (!ATILoadModules(pScreenInfo, pATI))
goto bail;
pATI->displayWidth = pScreenInfo->displayWidth;
/* Initialise for panning */
ATIAdjustPreInit(pATI);
/*
* Warn about modes that are too small, or not aligned, to scroll to the
* bottom right corner of the virtual screen.
*/
MinX = pScreenInfo->virtualX - pATI->AdjustMaxX;
MinY = pScreenInfo->virtualY - pATI->AdjustMaxY;
pMode = pScreenInfo->modes;
do
{
if ((pMode->VDisplay <= MinY) &&
((pMode->VDisplay < MinY) || (pMode->HDisplay < MinX)))
xf86DrvMsg(pScreenInfo->scrnIndex, X_WARNING,
"Mode \"%s\" too small to scroll to bottom right corner of"
" virtual resolution.\n", pMode->name);
else if ((pMode->HDisplay & ~pATI->AdjustMask) / pScreenInfo->xInc)
xf86DrvMsg(pScreenInfo->scrnIndex, X_WARNING,
"Mode \"%s\" cannot scroll to bottom right corner of virtual"
" resolution.\n Horizontal dimension not a multiple of %ld.\n",
pMode->name, ~pATI->AdjustMask + 1);
} while ((pMode = pMode->next) != pScreenInfo->modes);
/* Initialise XVideo extension support */
ATIXVPreInit(pATI);
/* Initialise CRTC code */
ATIModePreInit(pScreenInfo, pATI, &pATI->NewHW);
/* Set up for I2C */
ATII2CPreInit(pScreenInfo, pATI);
if (!pScreenInfo->chipset || !*pScreenInfo->chipset)
pScreenInfo->chipset = "mach64";
PreInitSuccess = TRUE;
bail:
ATILock(pATI);
bail_locked:
ATIPrintNoiseIfRequested(pATI, BIOS, BIOSSize);
ATIUnmapApertures(pScreenInfo->scrnIndex, pATI);
return PreInitSuccess;
}